Advertisement
Table of Contents
1. General
The KAA0608 is a cable assembly used for testing KNG-P series radios. This cable is compatible with
HP8920 only. If using Aeroflex 3920, please use KAA0608A.
2. The Kit
Cable Assy
1
7001-31095-500_Ver. 11-17 | BK Technologies
KAA0608
User Guide
RF Coax Cable – 1ea.
Double Banana
Plug Adapter -1 ea.
BNC Male Binding Post - 2 ea.
Advertisement
Table of Contents
Related Manuals for BK TECHNOLOGIES KAA0608
Summary of Contents for BK TECHNOLOGIES KAA0608
- Page 1 KAA0608 User Guide 1. General The KAA0608 is a cable assembly used for testing KNG-P series radios. This cable is compatible with HP8920 only. If using Aeroflex 3920, please use KAA0608A. 2. The Kit RF Coax Cable – 1ea. Double Banana Plug Adapter -1 ea.
- Page 2 Connect the RF Coax cable (N-Type) to the RF IN/OUT port of HP8920. g. Connect the RF Coax cable (SMA) to KNG-P antenna connector. h. Connect the side connector assembly to the radio Accessory port. 7001-31095-500_Ver. 11-17 | BK Technologies...
- Page 3 Place the cursor to Audio In Lo then press the cursor control knob then choose Float. k. Go back to RX Test mode, the generator is now ready for use. NOTE: The KNG-P series radios have a floating ground audio output and should be connected as such. 7001-31095-500_Ver. 11-17 | BK Technologies...
- Page 4 Technical Service Support - Customer Service BK Technologies 7100 Technology Drive Melbourne, FL 23904 (800) 422-6281 www.BKTechnologies.com 7001-31095-500_Ver. 11-17 | BK Technologies...
Need help?
Do you have a question about the KAA0608 and is the answer not in the manual?
Questions and answers