References To Illustrations; Connection - Miele Classic C1 Exclusive PowerLine Operating Instructions Manual

References to illustrations

The illustrations referred to in the text
are shown on the fold-out pages at
the end of these Operating Instruc-
tions.

Connection

Attaching the suction hose (Fig. 01)
 Insert one connector into the suction
socket on the vacuum cleaner until it
clicks into position.
 If you want to separate the pieces
again, press the release buttons at
the side of the connector and pull
the connector out of the suction
socket.
Connecting the suction hose to the
handle (Fig. 02)
 Insert the connector at the other end
of the suction hose into the handle
until it clicks into position.
Your vacuum cleaner is fitted with one
of the following suction wands, de-
pending on model.
- EasyLock suction wand
- Comfort telescopic suction wand
Assembling the EasyLock suction
wand (Fig. 03)
 Hold the suction wand by the con-
nection piece and push it into the
second suction wand, turning it
clockwise or counterclockwise until it
clicks into position.
 Slide the connection piece upwards
until it clicks into position.
Connecting the handle to the suction
wand (Fig. 04)
 Insert the handle into the suction
wand until it clicks into position. To
do this, line up the guides on the two
pieces.
 To release the handle from the suc-
tion wand, press the release button
and pull the handle out of the wand,
twisting it slightly as you do so.
Adjusting the telescopic suction
wand (Fig. 05)
One part of the telescopic suction wand
is packed inside the other, and it can be
adjusted to suit your height for comfort-
able vacuuming.
 Grasp the release mechanism and
adjust the telescopic suction wand to
the required length.
Connecting the suction wand to the
floorhead (Fig. 06)
 Push the suction wand into the floor-
head and turn it clockwise or coun-
terclockwise until it clicks into posi-
tion.
 To separate the suction wand from
the floorhead, press the release but-
ton and pull the suction wand away
from the floorhead, twisting it slightly
as you do so.
Adjusting the floorhead (Fig. 06)
(only for models with an adjustable
floorhead included in the standard ver-
sion)
This vacuum cleaner can be used for
daily cleaning of carpets, rugs, and ro-
bust hard flooring.
en-US
15