Page 3
Ball Joint Telescopic Arm Length Adjustment Knob (Adjust the Length of the Arm) Suction Cup Lock Angle Adjustment Knob (Adjust the Angle of the Arm) Suction Cup Dashboard Pad ��...
Installation Steps Tips for Placing the Dashboard Pad Before installing the mount on uneven or textured dashboard, please firstly stick the dashboard pad (only one-time use). Tear off the red protective sticker on the pad, stick it to the dashboard, press it hard for over � minute then let it rest for �-�...
Page 5
Tips for Using the Suction Cup �. Clean the dashboard or windshield where you need to install the car phone mount with alcohol pads or a wet cloth, wait for it to dry. �. After attaching the suction cup, rotate its base completely to fix the suction cup.
Page 6
Assembly of Mount �. Take out the grip, assemble it with suction up. �. Find a suitable place, attach the car mount. ��...
Using Steps �. Insert the phone into the car mount, the clamp arms would catch the phone automatically, then the car mount is ready to use. �. After usage, please take out the phone as shown in the picture. ��...
Suction Cup ×�, Package List Dashboard Pad ×�, User Manual ×� The parameters above are derived from the laboratory of VANMASS®. The actual parameters would be different because of products and other factors. The image shown here is indicative only. Attentions Avoid dropping.