Recording A Video Clip - ebi BELL+HOWELL S20HD User Manual

Flash on: Force on the flash
Flash off: Force off the flash
3. Press the SHUTTER button to shoot a photo.
Note:
When the battery power level is low, the flash strobe will not activate.
Pressing the RIGHT/FLASH button, a message displays "Low battery" on to
inform you that the flash strobe will not fire.

Recording a Video Clip

1. Power the camera on and press the DOWN/MODE button to set the
digital camera to video record
2. Zooming:
Press the T or W button to zoom in or zoom out the screen. The value of
magnification level appears on the LCD monitor.
3. Press the SHUTTER button to start recording.
4. Press the SHUTTER again to end recording. If the memory is full the
video camera will stop recording automatically.
• The upper portion of the LCD monitor displays the recorded time.
• Do not remove the card when video recording, Or, it may cause the digital
camera can not work normally.
mode.
17