Table of Contents
Advertisement
Each time the LEFT/SELF-TIMER button is pressed, the self-timer icon
changes.
Off: Don't use self-timer.
2 Seconds: The shutter release will delay for 2 seconds.
5 Seconds: The shutter release will delay for 5 seconds.
10 Seconds: The shutter release will delay for 10 seconds.
3. Press the SHUTTER button to take a picture.
4. After Self-timer begins, the self-timer LED will flash. One second per
Flash until count down is completed.
Using the Flash
The flash is not only for taking pictures when there is insufficient light, but
also for when the subject is in shade or with backlight conditions. Pressing
the RIGHT/FLASH button cycles your camera through the various flash
modes. The flash will not activate during continuous shooting or movie
recording.
1. Set the digital camera to a Capture mode (photo or video).
2. Press the RIGHT/FLASH button to change the flash mode.
Each time the flash button is pressed, the flash icon changes.
Auto: Automatically turn on/of
16
Advertisement
Table of Contents
