Troubleshooting - Titan SteamMaster Operating Manual

ACCESSORIES
SSP SmALL STEAmPLATE
For stripping small awkward areas. Plate size 6"
x 3".
OTHER USES
The steamers can also be used to:
•
Remove Artex®.
•
Lift stuck down vinyl tiles.
•
Disinfect soil.
•
Kill garden weeds.
6

TROUBLESHOOTING

UNIT FAILS TO BOIL
•
The thermal cut-out has operated. Switch off,
allow to cool, refill with water then switch on
again.
•
If using an extension cord - check that the
thermal re-set button on the extension cord
has not tripped out. Check that the extension
cord is rated at a minimum of 15 Amps.
If the unit still will not operate return the unit
to the dealer or authorized agent to check the
thermal fuse link and element. ONLY QUALIFIED
ELECTRICIANS SHOULD UNDERTAKE THIS
WORK.
UNIT kEEPS CUTTING OUT
•
Check that water is above MIN level.
•
Check that the extension cord is rated at 15
Amps minimum and fully unwound.
•
Check that no additives have been used.
STEAm ESCAPING FROm PRESSURE CAP
•
Check for blockages in hose or steamplate.
•
Clean seating around cap area.
DESCALING
To maintain peak performance of the unit,
particularly in areas of hard water, it may be
necessary to descale the element in the unit.
Proprietary descaling products, can be used,
always follow the manufacturers instructions.
SteamMaster