Table of Contents
Advertisement
3-9
3-10
Note:Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
3-11
3-12
3-13
3-14
3.5.3 Function button "Speed"
Touch this button (Fig. 3-9) to change or deselect the
spin of the programme.If the display showing "0" the
spinning function is not activated ands spinning will not
be started.
3.5.4 "Extra Rinse" button
Touch this button (Fig. 3-10) to rinse the laundry more
intense with fresh water. This is recommended for pe-
ople with sensitive skin.
By touching the button, there are 3 selection for the extra
rinse count. The display will show "P—0 / P—1/ P –2".
Different extra rinsing count ca be selected for different
programme.
3.5.5 "Steam" button
Touch this button (Fig 3-11) to select the steam program,
then the current program temperature value will be cha-
nged to the maximum allowed value. The maximum te-
mperature value can be viewed on the page of the par-
ameters table in the manual. You can select if you requ-
ire this funtion when programmers "Cotton, Synthetics,
Mix, Baby care, Daily " are used. The icon will light up
when using the steam wash function.
3.6 "Start/Pause" button
Touch this button (Fig. 3-12) gently to start or pause
the wash cycle.
3.7 Child lock
Touch button "Delay" and "Steam" (Fig. 3-13) for 3
seconds simultaneously to activate the child lock
feature. The child lock indicator on the display will
light up when it's activated. Press the two buttons
simultaneously again to deactivate the feature.
This feature is an optional when the machine is running.
The display showing "clol-" (Fig. 3-14) if the child
lock is activated. This feature is to disable controls
and prevent child from changing programme or
operating the appliance.
3-Control panel
10
Advertisement
Table of Contents
