Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG SCS51400S0
Summary of Contents for AEG SCS51400S0
- Page 1 SCS51400S0 EN FRIDGE-FREEZER USER MANUAL...
- Page 2 Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of...
-
Page 3: Table Of Contents
CONTENTS Contents 4 Safety information 6 Operation 7 First use 8 Daily use 9 Helpful hints and tips 11 Care and cleaning 13 What to do if… 15 Technical data 15 Installation 22 Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information... -
Page 4: Safety Information
Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. -
Page 5: Daily Use
• It is dangerous to alter the specifications or modify this product in any way. Any dam- age to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel. -
Page 6: Operation
Operation • Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance. Installation For electrical connection carefully follow the instructions given in specific paragraphs. •... -
Page 7: First Use
Temperature regulation The temperature is automatically regulated. To operate the appliance, proceed as follows: • turn the Temperature regulator toward lower settings to obtain the minimum coldness. • turn the Temperature regulator toward higher settings to obtain the maximum coldness. A medium setting is generally the most suitable. -
Page 8: Daily Use
Daily use DAILY USE Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep- frozen food for a long time. To freeze fresh foods it is not necessary to change the medium setting. However, for a faster freezing operation, turn the temperature regulator toward higher settings to obtain the maximum coldness. -
Page 9: Helpful Hints And Tips
Do not use metallic instruments to remove the trays from the freezer. Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi- tioned as desired. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. -
Page 10: Hints For Fresh Food Refrigeration
Helpful hints and tips • If the ambient temperature is high and the Temperature Regulator is set to low tem- perature and the appliance is fully loaded, the compressor may run continuously, caus- ing frost or ice on the evaporator. If this happens, set the Temperature Regulator to- ward warmer settings to allow automatic defrosting and so a saving in electricity con- sumption. -
Page 11: Care And Cleaning
Hints for storage of frozen food To obtain the best performance from this appliance, you should: • make sure that the commercially frozen foodstuffs were adequately stored by the re- tailer; • be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time;... -
Page 12: Defrosting The Freezer
Care and cleaning It is important to periodically clean the defrost water drain hole in the middle of the refrigera- tor compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole. -
Page 13: What To Do If
Never use sharp metal tools to scrape off frost from the evaporator as you could damage Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. A temperature rise of the frozen food packs, during defrosting, may shorten their safe storage life. -
Page 14: Replacing The Lamp
What to do if… Problem Water flows on the rear plate of the refrigerator. Water flows into the re- frigerator. Water flows on the ground. The temperature in the ap- pliance is too low. The temperature in the ap- pliance is too high. The temperature in the re- frigerator is too high. -
Page 15: Technical Data
3. Remove the lamp cover (refer to the il- lustration). 4. Replace the used lamp with a new lamp of the same power and specifically de- signed for household appliances. (the maximum power is shown on the lamp cover). 5. Install the lamp cover. 6. -
Page 16: Electrical Connection
Installation Climate class Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate cor- respond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. -
Page 17: Ventilation Requirements
4. Loosen the middle hinge. 5. Remove the lower door. Loosen and remove the lower pin. On the opposite side: 1. Tighten the lower pin. 2. Install the lower door. 3. Tighten the middle hinge. 4. Install the spacer. 5. Install the upper door. 6. - Page 18 Installation Install the appliance in the niche. Push the appliance in the direction of the arrow (1) until the upper gap cover stops against the kitchen furniture. Make sure that the distance between the appliance and the cupboard front- edge is 44 mm. Push the appliance in the direction of the arrow (2) against the cupboard on the opposite side of the hinge.
- Page 19 Apply the adhesive sealing strip to the appliance as shown in figure. Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in opposite case. Attach the covers (C, D) to the lugs and the hinge holes.
- Page 20 Installation Disconnect the parts Ha, Hb, Hc and Hd Install the part Ha on the inner side of the kitchen furniture. Push the part Hc on the part Ha. ca. 50 mm 90° 21 mm 90° ca. 50 mm 21 mm...
- Page 21 10. Open the appliance door and the kitch- en furniture door at an angle of 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes. 11. Remove the brackets and mark a dis- tance of 8 mm from the outer edge of the door where the nail must be fitted (K).
-
Page 22: Environmental Concerns
Environmental concerns 13. Press the part Hd on the part Hb. Do a final check to make sure that: • All screws are tightened. • The sealing strip is attached tightly to the cabinet. • The door opens and closes correctly. ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not... - Page 24 212720331-00-21052010...