Table of Contents
Advertisement
Basic operations
NOTES
• Once a disc tray whose status is known by the unit becomes accessible when the carousel opens, the corresponding indicator
lights even if the disc is not set.
• When the RESUME function is "ON" or "DISC RESUME" and the resume point is memorized, pressing 3 starts playback from
that point instead of the beginning. See page 23.
• During playback, the display window shows the title/chapter, group/track, or track number being played.
• During DVD VIDEO playback, pressing 3 moves back the playback position 10 seconds before the current position. See page 21
for details.
• When a DVD disc is set in the front-left tray, the unit usually starts playback automatically after closing the carousel and reading
the disc contents.
To stop playback completely
Press 7.
The unit stops playback.
• If you press 0 OPEN/CLOSE during playback, the unit stops playback and opens the disc tray carousel.
To stop playback temporarily
Press 8.
The unit pauses playback. To resume playback, press 3
To change discs during playback [EXCHANGE]
You can open the disc tray carousel during playback and change discs that are not being played back.
¶ During playback (with the carousel closed)
In this condition, you can see the EXCHANGE indicator is illuminated in green.
1
Press EXCHANGE.
The carousel opens without interrupting playback.
"EXCHANGE" is briefly shown in the display window.
2
Set, remove or change discs in the accessible disc trays.
3
To access to the other trays, press DISC SKIP.
Each press of the button rotates the carousel, however, the disc tray corresponding to the disc being played back is
never accessible.
4
Press EXCHANGE or 0OPEN/CLOSE.
The carousel closes.
NOTES
• During the steps 2 and 3 above, only the
• The EXCHANGE button does not work during program playback.
20
.
7
8
4
¢
1
¡
,
,
/
and
/
Available :
Available :
Available :
buttons are effective for the disc being played back.
Advertisement
Table of Contents
