Advertisement
Available languages
Available languages
User Manual
Product Diagram
Front & Rear Panel
▪
5VDC: Connect the 5VDC 2A Power Supply.
▪
HDMI Input 1 -4: Connect to an HDMI source with an HDMI cable.
▪
HDMI Output A & B: Connect to an HDMI display using HDMI cable.
▪
3.5mm Audio Out: Connect to a 3.5mm analogue audio output using a 3.5mm cable.
▪
Coaxial Audio Out: Connect to a coaxial audio output using a coaxial cable.
▪
TosLink (Optical) Audio Out: Connect to a TosLink (Optical) audio output using a Optical cable.
▪
Input – Output A LED Indicators: The corresponding Input – Output configuration will illuminate.
▪
Input – Output B LED Indicators: The corresponding Input – Output configuration will illuminate.
▪
ARC LED: The LED will illuminate when ARC is turned On and output the display audio via the TosLink
& Coaxial outputs. If ARC is off, the LED will not illuminate and output the HDMI Input audio via the
3.5mm, ToslInk and Coaxial output ports.
▪
2.0CH/5.1Ch/Pass LED Indicator: Indicates the audio format in use.
▪
IR: IR Signal Receiver Eye.
▪
Output A / B Switch: Push to switch between output A & B.
▪
ARC A / B: Push to turn on the ARC function for Output A or B.
▪
Power LED Indicator: This LED will illuminate once power is provided to the matrix.
IR Remote
▪
Power: Press once to turn on the matrix, press again to turn off the matrix.
▪
Mute: Press to turn on or off audio extraction function.
▪
ARC A / B: Press to turn on or off the ARC (Audio return Channel) Function.
▪
On / Off: Press once to turn on the input connected to the corresponding output, press again to turn
off.
▪
2CH/5.1CH/Pass: Select the desired audio extraction format.
▪
1 – 4: Select the corresponding Input for each output.
English
Advertisement
