Related Manuals for Cloud CXL-40T
Summary of Contents for Cloud CXL-40T
- Page 1 CXL-40T, CXL-100T, CXL-200T, CXL-400T 100/70 V Transformers CXL-800, CXL-1600 Rackmount Housings Installation Guide CXL Manual v1.0...
-
Page 2: Important Safety Notes
AC voltages up to 100 V (141 V peak Do not expose transformers to rain or moisture. Transformers must be installed in a safe manner. Cloud Electronics Ltd. accept no responsibility for hazardous installations. CXL Manual v1.0... -
Page 3: Table Of Contents
Contents Important Safety Notes ....... 2 Introduction ........... 4 Scope of this manual ..........4 Box contents ............... 4 Transformer/Amplifier compatibility ..... 5 Transformer/Rackmount Housing compatibility . 5 Installing transformers in the CXL-800 rackmount housing ....... 6 Installing transformers in the CXL-1600 rackmount housing ..... -
Page 4: Introduction
The CXL range of high-performance 100/70 V toroidal transformer assemblies are intended for use with various models of Cloud power amplifiers and mixer-amplifiers, with applications in background music, public address and PA/VA. They interface the amplifiers’ low-impedance outputs to 100 V-line or 70 V-line loudspeaker systems. -
Page 5: Transformer/Amplifier Compatibility
Transformer/Rackmount Housing compatibility The four models of CXL Series transformers are compatible with current Cloud products as shown in the table below. CXL-800 One transformer is required for each amplifier channel to be connected to a 100/70 V-line loudspeaker system. -
Page 6: Installing Transformers In The Cxl-800 Rackmount Housing
M3 x 25 mm hex pillar. The screws and/or pillars Up to eight CXL-40T or CXL-100T transformers may be should be passed through the fixing holes and tightened into installed in a CXL-800. Any mixture of the two types may the tapped holes in the fixing brackets. -
Page 7: Installing Transformers In The Cxl-1600 Rackmount Housing
CXL-1600. Any mixture of the two types may also be fitted, up to a total of four transformers. The CXL-1600 will also accept up to CXL-40T and/or CXL-100T transformers, in the same manner as the ... -
Page 8: Wiring The Rackmount Housings
0.75 mm gauge (CXL-40T, CXL-100T & CXL-200T) or 1 mm gauge (CXL-400T). Note that pins 1 and 3 should be wired for a 100 V-line system, and pins 1 and 2 for a 70 V-line system. -
Page 9: Installing Transformers Without Cxl Series Rackmount Housings
GAUGE installed in various ways without the use of CXL-800 Primary (input) 1.5 mm or CXL-1600 rackmount housings. However, it is important CXL-40T Secondary (output) 0.75 mm to appreciate that correct use of the rackmount housings Primary (input) 1.5 mm... - Page 10 CXL Manual v1.0...
- Page 11 CXL Manual v1.0...
- Page 12 Cloud Electronics Limited 140 Staniforth Road Sheffield S9 3HF England Tel: +44 (0)114 244 7051 Fax: +44 (0)114 242 5462 email: info@cloud.co.uk web: www.cloud.co.uk...
Need help?
Do you have a question about the CXL-40T and is the answer not in the manual?
Questions and answers