Audio distribution sub-station and matrix (12 pages)
Summary of Contents for Cloud CXL-50T
Page 1
In all cases, the external wiring and associated speakers will need to comply with local electrical regulations for AC voltages up to 100 V (141 V peak Do not expose the transformer to rain or moisture. The transformer must be installed in a safe manner. Cloud Electronics Ltd., accept no responsibility for hazardous installations.
Page 2
Introduction The CXL-50T is an optional transformer kit for the MA60/MA60 , to permit the MEDIA MA60/MA60 to directly drive 100 V, 70 V or 50 V-line loudspeaker systems. The MEDIA transformer is rated at 50 W output, and is mounted internally. The outputs are available on a 4-pin 5 mm-pitch screw-terminal connector which occupies the hole (shown below) in the rear panel normally covered by a blanking plate.
Page 3
Replace the top cover, using the original screws. 10. Connect the speaker system to the line outputs using the mating connector. Note that only two of the pins will be used; one will always be pin 1 (0 V). CXL-50T Installation Guide v1.0...
Page 4
Loudspeaker EQ card socket Input PCB (vertically-mounted) MA60 MAIN PCB VIEW FROM REAR NOT TO SCALE - Only primary components shown Cloud Electronics Limited 140 Staniforth Road, Sheffield, S9 3HF. England. Telephone: +44 (0)114 244 7051 Fax: +44 (0)114 242 5462 Web: www.cloud.co.uk...
Need help?
Do you have a question about the CXL-50T and is the answer not in the manual?
Questions and answers