Advertisement
A
The Remote Control Status LED (Z 7II/Z 6II)
Color
Flashes approximately once a
Green
Flashes quickly (approximately
Green
Flashes approximately once
Green
Orange
Orange
Red
Red
A
Adjusting Focus from the Camera
If [Focus] is selected for Custom Setting a2 [AF-S priority selection] in
focus mode AF-S, focus will lock when the camera shutter-release button
is pressed halfway. You can then press the shutter-release button on the
remote control to take a picture at the selected focus position.
A
The Standby Timer
To reactivate the camera after the standby timer has expired and the
monitor, viewfinder, and control panel have all turned off, turn the
remote control on and press and hold its shutter-release or movie-record
button.
Behavior
second
twice a second)
every three seconds
Flashes once
Flashes twice
Flashes once
Flashes twice
Searching for paired
Connected to camera.
Photography started.
photography ended.
Movie recording started.
Movie recording ended.
12
Status
camera.
Pairing.
"Bulb" or "Time"
Advertisement
