Foreword General This manual introduces the features and structure of the wireless router ((hereinafter referred to as "the device"). Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury.
Important Safeguards and Warnings The manual helps you to use our product properly. To avoid danger and property damage, read the manual carefully before using the product, and we highly recommend you to keep it well for future reference. Operating Requirements ●...
1 Installation and Connection Step 1 Connect the power adapter to the router. Step 2 Connect the router to carrier network by connecting the router network port (WAN port) and carrier network port (broadband network port or modem network port) with network cable.
2 Indicator Light Table 2-1 Description of indicator light Working Possible Recommended Name Fault Detected Status Cause Operation Make sure that the Power No power power adapter is not indicator Solid red supply damaged and plug it light again. No network Network connection or Check whether the...
3 FAQ ● The router works normally, but I cannot access any website. This might be caused by network problems, and you can contact your network carrier for help. ● Failed to open router management interface. 1. Make sure that the device is connected correctly and the corresponding indicator is normal. 2.
Appendix 1 Cybersecurity Recommendations Cybersecurity is more than just a buzzword: it’s something that pertains to every device that is connected to the internet. IP video surveillance is not immune to cyber risks, but taking basic steps toward protecting and strengthening networks and networked appliances will make them less susceptible to attacks.
Page 9
6. Enable HTTPS We suggest you to enable HTTPS, so that you visit Web service through a secure communication channel. 7. MAC Address Binding We recommend you to bind the IP and MAC address of the gateway to the device, thus reducing the risk of ARP spoofing.
Need help?
Do you have a question about the WR5210-IDC and is the answer not in the manual?
Questions and answers