Advertisement
ECONAVI
■ Econavi with intelligent eco sensors
Intelligent eco sensors detect potential waste of energy using the human activity sensor and
sunlight sensor.
The human activity sensor scans areas of heat source and movement in a room.
• Based on area activeness, fl ap will adjust its position automatically.
• The human activity sensor is infl uenced by the location of the indoor unit, the movement speed of
human/non-human activity, temperature range, etc.
• The human activity sensor may mistakenly detect non-human activity and source of heat, such as
pets, or may not detect the human activity or source of heat if the person stays motionless.
• Do not place large objects near the sensor and keep away heating units or humidifi er from the
sensor's detections area.
The sunlight sensor detects changes in sunlight intensity in the room. It reduces the waste
of energy under less sunlight conditions.
4 Features
Area search
1
2
120º
7m
Human activity sensor detects presence/absence
of human beings and the movement speed of human
activities minimising the required amount of energy.
Operating conditions
Use this air conditioner in the temperature range indicated in the table.
Temperature °C (°F)
Max.
COOL
Min.
DBT : Dry bulb temperature, WBT : Wet bulb temperature
ACXF55-16970_YA0118-0.indd 9
ACXF55-16970_YA0118-0.indd 9
Activity
Absence
3
detection
detection
Indoor
DBT
32 (89.6)
23 (73.4)
16 (60.8)
11 (51.8)
Sunlight
4
detection
Adjusts power to
changes in sunlight
intensity.
Outdoor
WBT
DBT
46 (114.8)
16 (60.8)
WBT
26 (78.8)
11 (51.8)
12/29/2017 3:00:53 PM
12/29/2017 3:00:53 PM
9
Advertisement
