Remove The C2-Board; Replace The Plasma Panel - Panasonic TC-P42GT30A Service Manual

Gpf14d-a chassis

Hide thumbs Also See for TC-P42GT30A:

Table of Contents

TC-P42GT30A

8.20. Remove the C2-Board

1. Remove the Contact metal bottom. (See section 8.18.)

2. Disconnect the flexible cables (CB8, CB9, CB10, CB11,

CB12, CB13, CB14 and CB15).

3. Disconnect the flexible cables (C20 and C21).

4. Disconnect the connector (C25).

5. Remove the screws (×4

Caution:

Place the Plasma panel on a flat surface of a table (cov-

ered by a soft cloth) and a cushion.

A new Plasma panel itself without Contact metals is fragile.

To avoid the damage to new Plasma panel, carry a new

Plasma panel taking hold of the Contact metals.

1. Place a carton box packed a new Plasma panel on the

flat surface of the work bench.

2. Open a box and without taking a new Plasma panel.

3. Attach the Cabinet assy and each P.C.Board and so on,

to the new Plasma panel.

All manuals and user guides at all-guides.com

) and remove the C2-Board.

Table of Contents