Table of Contents
Advertisement
SATA Port 5, 6,7, 8 [RAID]
This item only appears when OnChip SATA Type is set to [RAID]. If SATA ports 5, 6,
OnChip SATA MAX Speed [SATA 6.0Gb/s]
S.M.A.R.T. Status Check [Enabled]
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
SATA6G_1~8
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
USB Device Enable [Enabled]
Legacy USB Support [Enabled]
[Disabled]
The USB devices can be used only for the BIOS setup program.
[Auto]
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
EHCI Hand-off [Disabled]
[Enabled]
Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled]
Disables the function.
USB Single Port Control
Allows you to enable/disable individual USB ports.
USB3_1/2/3/4 [Enabled]
1.2.3 Motherboard layout in this user manual for the locations of the USB ports.
ASUS A88X-GAMER
®
OS with the
2-23
Advertisement
Table of Contents
