Clas Ohlson 36-3497/18-1080 Quick Manual

Rechargeable LED Torch • Art.no. 36-3497/18-1080
Please read the entire instruction manual before using the product and save it for future reference.
We apologise for any text or photographic errors and any changes of technical data. If you have
any questions concerning technical problems please contact our Customer Service Department.
Safety
- Never charge the torch where there is risk
for fire or on flammable surfaces.
- Only use rechargeable Ni-MH batteries,
LR6/AA.
- Only use the included charger or a
recommended charger for the torch.
- Never use a defective charger or cable.
- Always disconnect the charger from the
mains after charging since the charger's
contacts remain live.
- Never expose the lamp to moisture or liquids.
- Never carry the lamp and the charger by
the charger lead.
- Never expose the batteries to fire or
high temperatures.
- Avoid contact with leaking batteries.
Product Description
Rechargeable torch with 1 W LED.
- Operates on 2 rechargeable NiMH LR6/AA
batteries (included).
- Comes with a 230 V charger.
Inserting the batteries
1. Unscrew the battery cover from the
torch bottom.
2. Insert 2 rechargeable Ni-MH R6/AA
batteries (included) with the positive
terminals (+) inwards (facing the bulb).
N.B. Make sure that the batteries are
correctly aligned.
3. Replace the battery cover.
The torch's batteries are delivered uncharged
and must be charged first before using. Charge
the batteries for 10 hours the first time to reach
full capacity.
GREAT BRITAIN For consumer contact, please visit www.clasohlson.
co.uk and click on customer service.
ENGLISH
Operating Instructions
1. The On/Off switch on the torch's handle
turns the lamp on and off. Press to turn the
torch on/off.
2. Charge the torch when the light intensity
decreases. Turn off the torch and connect it
to the charger.
Charging
1. Turn off the torch before connecting it to
the charger.
2. Rotate the rubber ring so that it sits
correctly (see picture). Connect the
charger's DC plug to the charger
connection on side of the torch. Plug the
adaptor into a wall socket.
3. Charge the batteries for 10 hours the first
time to reach full capacity. Remove the
charger from the power point when charging
is complete. Rotate the rubber ring so that it
protects the torch's charging terminals.
Care and Maintenance
Use a soft damp cloth to clean the product.
Never use solvents or strong detergents.
Disposal
When it is time to dispose of the product,
dispose of it according to your local
ordinances. If you are unsure please contact
your municipality.
Specifications
Power supply
Charger's input voltage
Charger's output voltage
Size
2 x LR6/AA
NiMH batteries
230 V AC, 50 Hz
3 V DC, 150 mA
214 x 37 mm