Instructions For Use - Snailax SL-49A2 Use & Care Manual

Instructions for use

1. Turn off the massager before replacing another massage head.
2. Your massager comes with 4 massage heads . Install the
different heads by pressing the head un�l it is totally inserted.,
detach the massage head by twis�ng an�-clockwise & pulling out.
! Note: Always turn off the device while replacing the heads.
3. Turn on the massager by opera�ng the control bu�ons (insturc�ons as below)
4. Apply the massager head lightly to the area you wish to treat. Move the unit
slowly, holding it over the targeted area. Treat the area for a short period of
�me and move to another area. NEVER treat the same area for longer than
1 minute.
5. To turn the unit off by pressing the power bu�on for 2-3 seconds.
For your safety, the device will automa�cally turn off a�er 10 minutes of
con�nuous use.
Type C
Charging Port
Power/Intensity Bu�on
Long press for 2-3 seconds
to turn on the device, short
press to cycle the intensity
Level 1 to Level 4, long press
again to turn off the device.
Heat Emission Hole
3