Table of Contents
Advertisement
OWNER SERVICE
Shielding Repair
DANGER
Full shielding must be installed when operated in
populated areas or other areas where thrown objects
could injure people or damage property.
This shielding is designed to reduce the risk of
thrown objects. The mower deck and protective
devices cannot prevent all objects from escaping
the blade enclosure in every mowing condition. It is
possible for objects to ricochet and escape, traveling
as much as 300 feet (92 m).
Rear Band
Inspect rear band each day of operation and replace if bent,
cracked or broken.
Rubber Shielding
Inspect rubber shielding each day of operation and replace
if cracked or broken.
22
Cleaning
After Each Use
• Remove large debris such as clumps of dirt, grass, crop
residue, etc. from machine.
• Inspect machine and replace worn or damaged parts.
• Replace any safety decals that are missing or not readable.
Periodically or Before Extended Storage
• Clean large debris such as clumps of dirt, grass, crop
residue, etc. from machine.
• Remove the remainder using a low-pressure water spray.
1. Be careful when spraying near scratched or torn safety
decals or near edges of decals as water spray can peel
decal off surface.
2. Be careful when spraying near chipped or scratched
paint as water spray can lift paint.
3. If a pressure washer is used, follow the advice of the
pressure washer manufacturer.
• Inspect machine and replace worn or damaged parts.
• Sand down scratches and the edges of areas of missing
paint and coat with spray paint of matching color (purchase
from your dealer).
• Replace any safety decals that are missing or not readable
(supplied free by your dealer). See Safety Decals on pages
9-11 for location drawing.
Advertisement
Table of Contents
