Narada NPFC Series Operation Manual page 5

Part 1 Part 1 Safety & Warning Safety & Warning
– –
The NPFC series LiFePO The NPFC series LiFePO
important recommendations in this manual: important recommendations in this manual:
The equipment shall be installed by the professional training staff The equipment shall be installed by the professional training staff
 
Battery maintenance should be carried out by the experienced professionals and aware Battery maintenance should be carried out by the experienced professionals and aware
 
of the preventive measures on the potential harm of the battery. of the preventive measures on the potential harm of the battery.
Note: Be care of the risk of electric shoc Note: Be care of the r
 
pay attention to the follow pay attention to the following points during operation
  Remove watches, rings or other metal objects Remove watches, rings or other metal objects
Use tools with insulated handles Use tools with insulated handles
 
Do not place tools or metal objects on the battery Do not place tools or
 
  Do not direct access to the battery system to the mains grid power outlet Do not direct access to the battery system to the
Do not put the battery system into fire, do not use or storage the battery near to the high Do not put the battery system into fire, do not use or storage the battery near to the high
 
temperature source temperature source
  Do not use liquid Do not use liquid or other objects placed into the battery system.
Do not open or cut the battery, not to hit, throw or Do not open or cut
 
Using special communication between battery module and power plant to Using special communication between battery module and
 
Be sure to subject to charge and discharge paramet Be sure to subject to
 
The output interface of the system is still voltage when grid power cut, avoid electric The output interface of the system is still voltage when grid power cut, avoid electric
 
shock or short circuit when operation shock or short circuit when operation
  Please check if the box is damaged. If damaged, please immediately notify the supplier Please check if the box is damaged. If damaged, please immediately notify the supplier
If you find leaking liquid or white If you find leaking liquid or white powder residue on product, prohibit operation.
 
LiFePO LiFePO
battery system installation, operation, maintenance should follow battery system installation, operation, maintenance should follow
4 4
isk of electric shock for large curren k for large current in case of battery
ing points during operation
metal objects on the battery
or other objects placed into the battery system.
the battery, not to hit, throw or step on the battery
charge and discharge parameters setting in this
powder residue on product, prohibit operation.
Battery Battery Module Module for for Telecom Telecom
4 4
– –
Part 1 Part 1 Safety & & W W arning Safety
t in case of battery short circuit,
mains grid power outlet
step on the battery
power plant to charge battery
ers setting in this manual manual
Operation Manual Operation Manual
arning 1 1
short circuit,
charge battery