Table of Contents
Advertisement
Quick Links
BEFORE INSTALLING:
PLEASE CHECK TO MAKE SURE YOU HAVE
ALL PARTS REQUIRED FOR INSTALLATION.
Please retain this manual after installation for future
reference and maintenance.
IMPORTANT:
• Two people are required to install this bathtub.
• This freestanding tub is not designed to support
weight along its rim. Please do not sit or stand on it.
STEP 1
Set tub in installation location.
Adjust leveling legs with an adjustable wrench, and level
tub using spirit level.
Check for level across the top of the tub.
Check for plumb along drain side,
and then make sure tub is
resting solidly on all four feet
STEP 2
Mark the floor with the outline of the
tub, or tub feet, with a marking
pencil to make it easier to reposition.
Free-Standing Bathtub
INSTALLATION GUIDE
op of the tub.
in side,
eet
TOOLS
REQUIRED
ADJUSTABLE
WRENCH
SPIRIT
LEVEL
TAPE
MEASURE
MARKING
PENCIL
CAULKING
GUN
Advertisement
Table of Contents
Related Manuals for miseno 232068-BAT-WH
Summary of Contents for miseno 232068-BAT-WH
- Page 1 Free-Standing Bathtub INSTALLATION GUIDE TOOLS BEFORE INSTALLING: PLEASE CHECK TO MAKE SURE YOU HAVE REQUIRED ALL PARTS REQUIRED FOR INSTALLATION. Please retain this manual after installation for future reference and maintenance. IMPORTANT: ADJUSTABLE WRENCH • Two people are required to install this bathtub. •...
- Page 2 STEP 3 STEP 4 Carefully tilt the tub on its side and use a Reposition tub using pencil marks as a guide, flexible connector to connect the waste outlet making sure that the flexible connector is not to the trap as illustrated.* kinked on installation, as this will result in drainage issues.
Need help?
Do you have a question about the 232068-BAT-WH and is the answer not in the manual?
Questions and answers