Haier HWF95AN1 User Manual page 21

NZ AU
9-6 9-7
9-8 9-9
9-11
9-10
9-12 9-13
9-Care and cleaning
9.5 Long periods of disuse
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 9-6).
2.
3. Open the door to prevent formation of mould
and odours. Leave door open while not used.
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leaks.
9
for instance if the appliance:
Doesn´t drain the water.
Doesn´t spin.
Cause unusual noise while running.
WARNING!
hot! Before any action please ensure water has
cooled down.
1.
2. Push and open service flap (Fig. 9-9).
3. Provide a flat container to catch leach water
(Fig. 9-10). Be prepared to catch large amounts
of water.
4. Pull the drainhose out and hold its end above the
container (Fig. 9-10).
5. Take the sealing plug out of the drainhose (Fig.
9-10).
6. After complete drainage close drainhose (Fig.
9-11). and push it back into the machine.
7. Unscrew and remove counter clockwise the pump
9
8. Remove contaminants and dirt (Fig. 9-13).
9
9
21