Download Print this page

MTX 350069 User Manual page 2

Advertisement

Available languages

Available languages

LASER LEVEL, PLUMB LINE
2
Used for tiling, installation of windows, doors, hanging of paintings and etc., also for laying of pipes and
wiring.
DELIVERY COMPLETENESS
1.
Laser marker, plumb line — 1 pcs
2. Manual — 1 pcs
Specification
1
Dimensions, mm
2
Laser wave length, nm
3
Output power, mW
4
Deviation, mm/m
5
Battery AA
6
Battery life, h
7
Operating temperature, °С
8
Storage temperature, °С
9
Weight, gr
2
1. Housing.
3. Switch.
2. Laser.
4. Bubble level.
CORRECT USE
TECHNICAL DATA
Value
123 × 40 × 62
650
<1
±1
1,5 V × 2 pcs.
Up to 16 hours in continuous mode (alkaline battery).
0–40
-10–45
86
ASSEMBLY
4
3
1
LASER LEVEL, PLUMB LINE
OPERATING RULES
1. Do not operate this device under direct sunlight, high temperature and humidity.
2. Do not drop the device and avoid strong shocks.
3. Do not dismantle the laser
4. The responsibility for any improper use is carried by user
5. If the device is placed in storage, be sure to disconnect the power and remove the battery.
ORDER OF WORK
1. Open the battery compartment cover and insert two AA batteries (Drawing 1).
2. To mark a horizontal line: place the instrument on a firm level surface. Align the laser using the bubble
chamber. The aligned level must have the vial at the center of the bubble chamber. Switch on the device.
After that the device will start to show the horizontal line (Drawing 2).
3. To mark a vertical line: place the instrument on a firm level surface. Align the laser using the bubble
chamber. The aligned level must have the vial at the center of the bubble chamber. Switch on the device.
After that the device will start to show the vertical line.
4. If after the switching on the laser beam doesn't project, make sure that there are no obstacles in front of
the hole and a sufficiency battery charge.
4
1. Bubble of Horizontal line.
2. Switch.
3. Bubble of Vertical line.
4. Vertical laser beam.
SAFETY RULES
Do not look into the laser beam and don't point the laser beam directly into the eyes of others,
cars or aircraft. This can lead to serious damage to the eye.
Do not point the laser beam at mirrors or other similar surface.
Drawing 1
3
1
2
Drawing 2
3

Advertisement

loading