Table of Contents
Advertisement
Malfunction
Water is leaking.
Laundry is too damp.
Cause and Troubleshooting
Make sure that the heat exchanger cover handle is
▶
properly closed.
→ "Close base unit", page 36
Inappropriate program set for the type of fabric.
Set a time program for post-drying.
▶
→ "Programs", Page 24
Power supply has failed.
Check whether the interior lighting or other
▶
appliances are working.
The load quantity is too high.
Pay attention to the maximum load of the
▶
→ "Programs", Page 24 .
Warm laundry feels damper than it actually is after
the end of the program.
Remove the laundry from the drum immediately after
1.
drying.
Spread the items out to let them cool.
2.
Inappropriate drying target set.
→
"Change Drying Target", Page 23 .
▶
Drying target not adjusted.
→ "Adjust drying target", Page 23 .
▶
Loading quantity too little.
Set a time program for post-drying.
▶
→ "Programs", Page 24
Humidity sensor contaminated.
→ "Cleaning the humidity sensor", page 37 .
▶
Drying process aborted and condensed water container
filled.
→ "Emptying the condensate container", page 32 .
1.
→ "Push in the condensation container",
2.
page 33 .
→ "Starting the program", Page 28 .
3.
Troubleshooting NL
41
Advertisement
Table of Contents
