Table of Contents
Advertisement
CAREFULLY
Chance of cutting!
Sharp edges on the heat exchanger
can lead to cuts if touched.
Do not touch the fins of the heat
▶
exchanger.
Opening the bottom unit
1.
→ Page 34 .
Clean the heat exchanger cover
2.
with a soft brush.
Make sure all contaminants are
removed from the seal.
Slightly lift the center lip of the
3.
insert.
Cleaning and maintenance NL
Pull out the insert horizontally.
4.
Clean and dry the insert under
5.
running water.
Carefully clean the fins of the heat
6.
exchanger with the brush
attachment of a vacuum cleaner.
Make sure that the slats are
suctioned from top to bottom and
that they are not deformed or
damaged in the process.
35
Advertisement
Table of Contents
