Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for instagrid ONE max
Summary of Contents for instagrid ONE max
- Page 1 USER MANUAL V2.0...
-
Page 2: B - Safety Notes
B.1 – Intended use • The instagrid ONE max is used for the mobile power supply of electrical devices which are intended for operation via a standard domestic power socket (230 V / 16 A); hereinafter referred to as “loads”. -
Page 3: Rules For Handling The Instagrid One Max Safely
[4 | 8 | 9] of the instagrid ONE max must not be touched with fingers, tools or other objects. • The instagrid ONE max must not be used as a base for working on or as a makeshift workbench. • The housing [10] of the instagrid ONE max must not be submerged in water or mud. - Page 4 10]. • Do not operate the instagrid ONE max if the power cable exhibits a defect or the insulation is damaged. Protect the power cable so that it can neither become crushed, kinked nor damaged in any other way. In particular, pay attention to the power plug and the charging port on the instagrid ONE max.
-
Page 5: Table Of Contents
B.3 – Rules for handling the instagrid ONE max safely ....... -
Page 6: D - Warranty Information
The period of limitation for claims for defects is 24 months following delivery. 1. SCOPE OF SUPPLY Thank you for purchasing the instagrid ONE max. Check the completeness of the delivery following receipt. The following parts must be included: •... -
Page 7: Device Description
The main storage unit with a rated energy content of 2,100 Wh is split into independent elements with an energy content of less than 100 Wh. There is also a starter battery, which has a special role in starting the instagrid ONE max; see [section 5.3.1]. -
Page 8: Technical Data
Noise emissions <10 dB(A) Storage >3 years Connections Outlet socket CEE 7/3 socket (16 A) Outlet socket Neutrik powerCON® TRUE1® TOP AC charging inlet Neutrik powerCON® TRUE1® TOP Input fuse T5A L 250 V © 2022 instagrid All rights reserved... -
Page 9: Safety Considerations When Operating The Instagrid One Max
6.1.2]. The time after which the shutdown is triggered varies depending on ambient temperature and load current. At 25°C and 16 A, a complete discharge of the instagrid ONE max (100% -> 0%) is possible without triggering a shutdown. •... -
Page 10: Passive Protection At The Inlet
ONE max and loads must not exceed a value of 1.5 Ω. A wire with a cross-section of 1.5 mm² achieves this resistance at a length of approx. 60 metres (including live and neutral conductors;... -
Page 11: Concept Of Operation
. • Connect the instagrid ONE max to the mains with the power cable. Wait until all the LEDs display green lights continuously. Note: the plug of the charging cable must first be connected to the instagrid ONE max and then turned clockwise until it noticeably latches in. -
Page 12: Operating States
ONE max from the mains only once this time has lapsed. Note: it is possible to connect the instagrid ONE max to the mains via the charging inlet provided the rotary switch [3] is still in the position and to start the charging process ... -
Page 13: Discharge
• If the left LED is flashing, the charge state of the instagrid ONE max is low. When combined with loads with a high power draw, in rare cases this may lead to a compromise to operating behaviour. Charge the instagrid ONE max timely; see [section 5.2.2]. -
Page 14: Features
Due to external or internal influences, conditions may arise when starting or operating the instagrid ONE max that render the further use of the instagrid ONE max impossible; e.g. because of a defect that is present, or because continued operation (without conditions being changed) could lead to damage to the instagrid ONE max. -
Page 15: External Problems
ATTENTION! If the instagrid ONE max has damage unrelated to the frame [7], a repair must be performed by authorised specialist personnel. Do not open the instagrid ONE max. Under no circumstances should you put the instagrid ONE max in operation. -
Page 16: Miscellaneous 15
Do not store the instagrid ONE max for long periods of time in a discharged state. This could lead to a deep discharge of the instagrid ONE max and necessitate recommissioning by instagrid. -
Page 17: Manufacturer's Declaration 17
EU directives governing waste electrical and electronic equipment and batteries, as well as those directives' transposition into national law. At the end of the service life, the used instagrid ONE max should be handed over to authorised collection points, ideally discharged. Heed the regulations governing environmentally friendly disposal that apply in your area. - Page 18 instagrid.co...
Need help?
Do you have a question about the ONE max and is the answer not in the manual?
Questions and answers