Attaching The Rear Wheels - Xxxlutz Jimmy Lee Manual

EN

Attaching the rear wheels

Insert the rear wheels into the openings on the frame. When you hear a click, the rear wheels are
correctly fixed and locked in place. Note: The rear wheels can be removed by pressing the button
located in the middle of the wheel.
Warning! After mounting, check the locking by pulling both wheels back and forth! The wheels
must not be able to be pulled out without pressing the button. Wheels that are not fully locked can
come loose when riding, which can lead to accidents with life-threatening injuries.
Note: The bicycle trailer has a wheel guard. Always fold the wheel guard outwards when using it as a
bicycle trailer. The wheel guard protects the rear wheels from collision.
1.
ATTENTION!
The right tyres are essential! Use only the tyres supplied and keep them properly
maintained. Inflate the tyres to 30-35 P.S.I. and check the pressure before each
use. Do not use higher pressure tyres as this will make the trailer bouncy and pro-
ne to tipping over when lightly loaded. We recommend only tyres with road tread.
Do not use off-road tyres.
2.
1.
NOTICE!
The wheel guard protects the wheels
from collisions with obstacles.