InFocus LPTM425z User Manual page 46

Problem: Projected colors don't match the computer or video
player's colors
Just as there are differences in the displays of different moni-
•
tors, there are often differences between the computer image
and the projected image. Adjust the brightness, tint and/or
contrast from the Display menu. See "Brightness" on page 25,
"Tint" on page 25 and "Contrast" on page 25.
Problem: Lamp seems to be getting dimmer
The lamp begins to lose brightness when it has been in use for
•
a long time. Replace the lamp as described in "Replacing the
Projection Lamp" on page 35.
Problem: Lamp shuts off
A minor power surge may cause the lamp to shut off. Turn the
•
projector off, wait at least a minute, then turn it back on.
The most current troubleshooting information can be found in
the Service and Support section of our website at
http://www.infocus.com/service.
Before calling your dealer or InFocus Technical Support for assis-
tance, please have the following information available:
the projector's serial number (located on the bottom label)
•
the resolution of your computer.
•
Call InFocus Technical Support at
and 6 p.m. PST, Monday through Friday. Service is available in
North America after hours and on weekends for a fee at
.
1-888-592-6800
In Europe, call InFocus in The Netherlands at
between 8 a.m. and 6 p.m. Central European Time.
In Asia, call
(65) 332-0659
Or, send us an e-mail at
1-800-799-9911
between 9:30 a.m. and 5:30 p.m.
techsupport@infocus.com
between 6 a.m.
(31) 35-6474010
43