Advertisement
Quick Links
Advertisement
Related Manuals for Siamp VERSO BCM 800
Summary of Contents for Siamp VERSO BCM 800
- Page 1 cistern FrAMe VERSO BcM 800 ASSEMBLY AND MAINTENANCE MANUAL...
- Page 2 DescriPtiOn...
- Page 3 Float valve Flexible sheaths (x 2) Pipe attaching collar Shut‑off valve Toilet bowl attaching rods (x 2) Mechanism Setscrew (x 2) PSE template Adjustable foot (x 2) Supply bend Screw plug (x 8) Supply bend cap Plug (x 8) Toilet pipe cap Toilet bowl stud attaching tab (x 2) Supply sleeve Bowl attaching kit...
-
Page 4: Installation Types
instALLAtiOn tYPes ➊ Wall fixing eFFectiVe DiMensiOns ✓ I ‑ Frame depth = 180 to 245 mm II ‑ Thickness of front cladding = between 20 and 100 mm III ‑ Thickness of top cladding = between 25 and 60 mm IV ‑... - Page 5 i - AsseMBLinG tHe tOiLet BOWL AttAcHinG rODs AnD WALL FiXinG ➏ ➊ ➎ A = 230 mm A = 180 mm ➊ Measure the center distance of the toilet bowl (A) ➋ Insert the rods (I) into the holes of the frame, corresponding to the center distance ➌...
- Page 6 iii - PrePArinG FOr AttAcHMent ➌ ➋ ➊ Mark the drilling points (6 for wall and 2 for floor) ➋ Remove the frame and drill to a depth of 70 mm at the least, using ➊ an 10 mm diameter drill bit Position the screw plugs in the holes ➌...
-
Page 7: Water Supply Connection
V - AttAcHinG tHe FrAMe ➊ Attach the frame definitively Vi - WAter sUPPLY cOnnectiOn ➊ Insert the water supply tube in the cistern ➋ Connect your pipe to the shut‑off valve (b) either using the dual cone supplied or directly with the nuts provided on the water inlet (in this case, ensure tightness using a fibre washer) - Page 8 Vii - testinG WitH WAter ➊ ➋ Silicone Grease Insert the supply sleeve (h) and the drain ➊ sleeve on the toilet bowl ➋ Position the toilet bowl on the frame ➌ Turn on the water using the shut‑off valve (b) and wait until the toilet bowl fills ➍...
- Page 9 Viii - PrePArinG tHe cLADDinG Fasten the PSE template (d) on the access trap ➊ using two grey screws which can be found in the control panel box ➋ Fit the caps (f) and (g) on the supply bend (e) and on the drain pipe as well as the flexible sheaths (i) over the attaching rods of the toilet bowl (l) iX - cLADDinG...
- Page 10 X - tOiLet BOWL cOnnectiOn Using a rule placed as shown in the above drawing, Remove the sleeves from the toilet bowl and fit them ➊ ➋ draw a mark on the toilet bowl side, on the two to the frame. Using a rule placed as shown in the sleeves.
- Page 11 X - cOnnectinG tHe tOiLet BOWL (cont'd) ➏ Deburr the cut pipes using a file ➐ Measure the thickness at the rear of the toilet bowl (B) ➑ If necessary, cut the attaching rods (I) so that the part protruding from the wall measures (B) + 20 mm ➒...
- Page 12 Xi - AttAcHinG tHe tOiLet BOWL When the toilet bowl is correctly ➊ positioned, attach it using the kit (i) complying with the part stacking order: i = centering washer ii = metal washer iii = nut iv = cover...
- Page 13 Xii - POsitiOn in tHe cOntrOL PAneL ➊ Fasten the frame with two grey screws If the cladding is not very thick, shorten the screws by simply breaking them at the notch intended for this purpose. Break off the heads of the remaining screws ➋...
-
Page 14: Maintenance Operations
MAintenAnce OPerAtiOns During the use of your BCM 800 flushing cistern, you may be required to maintain VERSO the equipment. I - MAINTENANCE OF THE VALVE (filter cleaning, replacement of membrane) ➊ ➋ ➊ Remove the panel A ‑ Push towards the right B ‑... - Page 15 MAintenAnce OPerAtiOns (cont’d) II - MECHANISM MAINTENANCE (cleaning or replacement of the seal) Proceed in the same way as for the maintenance of the valve up to point then: ➍ ➊ Grasp the mechanism by the base and remove it from the cistern Seal Spare parts: Seal P/N 34 2332‑07...
- Page 16 VERSO SIAMP and we would like to thank you for your confidence in our products. As expert in technical equipment and accessories for the toilet, SIAMP has taken every possible measure to apply all the necessary care to the design and production of this product, offering a ten‑year guarantee except for rubber parts...
Need help?
Do you have a question about the VERSO BCM 800 and is the answer not in the manual?
Questions and answers