Advertisement
Ready To Go
SimpleSpec 600.01
Installation
1
Measure and Mark Dimensions
a
3form 600.01 must be fully supported on the bottom by the millwork supplied by others. It cannot be hung on
Z-clips only. Millwork must be built to allow future removal of lightbox for access to lighting.
b
Measure loose z-clip locations on the back of the 3form Lightbox and transfer dimensions onto the millwork it will
be mounted to.
For more information, please visit 3-form.com or call 800.726.0126
June 2018 | MAn-RTG-600-01 | ReV 002 © 2018 3form, Inc. All rights reserved.
tm
Installation Manual
5
Advertisement
