Advertisement
13. Cable Operation Confirmation
(1) Confirm that the Cable Card is inserted in the slot.
(2) Enter the EZ adjust menu by pressing Adjust on the
Service Remote Control (S R/C).
(3) Go to number 2 Cable Check and press the Right key (
(4) Confirm items below..
Name
Normal
OK
Descrambler
Check
CableCARD
CableCARD
is inserted.
OOB Path
OK(Lock)
FDC_SNR
OK(20dB above)
Video Signal
Normal Screen
All manuals and user guides at all-guides.com
ADJUSTMENT INSTRUCTIONS
G
) .
Defective
Not OK
TM
CableCARD
TM
is removed.
Not OK(Unlock)
Not OK(20dB under)
Black Screen
(No Picture)
- 16 -
14. Tilt & Keystone Adjustment
14-1. Required Test Equipment
(1) Hardware: Six angle wrenches, Spanner, and Screwdriver
(2) PC to output XGA signal
(3) Service Remote Control
14-2. Preparation for Adjustment
(1) Engine Fix Knob will be able to adjust, Lower Back Cover
does not close.
(2) After Set turn on, select the adjustment pattern come out
from screen using EYE Key on the Service Remote Control .
14-3. Adjustment
(1) After Engine to be completely affixed in the adjustment
Knob pillar from TV front, sees camera sheds light TV
Screen and Keystone & Tilt confirm from back side.
(2) Keystone adjust moving to upper, lower with Top, Bottom
adjustment BOLT and Tilt adjust moving to left, right with
Engine Base.
(3) Both sides Adjustment Knob and Top Mirror adjust to be
Tilt and Keystone is Max and Min difference 4mm.
(4) After adjustment completed, Engine fixes with Top fixation
BOLT.
<Tilt & Keystone Adjustment Pattern>
<DLP Engine>
Advertisement
