Table of Contents
Advertisement
602
- IMPORTANT NOTICE -
RESIDENTIAL HOME USE ONLY. Not intended for public areas
such as schools, churches, nurseries, day cares or parks
Parts missing or damaged?
Need assistance with assembly?
Contact Us First!
Please send your request to our central customer
service email: contact@spimbey.com
One of our customer service agents will reply to
you within 24 hours
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Spimbey 2002
Summary of Contents for Spimbey 2002
- Page 1 Parts missing or damaged? Need assistance with assembly? Contact Us First! Please send your request to our central customer service email: contact@spimbey.com One of our customer service agents will reply to you within 24 hours...
- Page 2 This page intentionally left blank...
-
Page 3: Assembly And Installation Instructions
REV: 3-13-2022 Play House Minor Assembly and Installation Instructions Intended for children f rom ages 3 to 10 Model: 2002 WARNING: ASSEMBLY BY AN ADULT RETAIN (BOX: 1003) THESE INSTRUCTIONS Spimba Inc. 108 Patriot Drive, Suite A, Middletown Do not use this playset until... -
Page 4: Warnings And Safe Play Instructions
Warnings and Safe Play Instructions CONTINUOUS ADULT SUPERVISION REQUIRED. Most serious injuries and deaths on playground equipment have occurred while children were unsupervised! Our products are designed to meet mandatory and voluntary safety standards. Complying with all warnings and recommendations in these instructions will reduce the risk of serious or fatal injury to children using this play system. -
Page 5: Instructions For Proper Maintenance
Instructions for Proper Maintenance Your Spimbey Playset is designed and constructed of quality materials with your child's safety in mind. As with all outdoor products used by children, it will weather and wear. To maximize the enjoyment, safety and life of your Play Set, it is important that you, the owner, properly maintain it. - Page 6 Playground Surfacing Materials Section 4 of the consumer product safety commission’s outdoor home playground safety handbook Select Protective Surfacing One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-protective surfacing under and around your play equipment.
-
Page 7: Assembly Information
Assembly Information Tools Required Robertson Drive Tape Measure Open End Wrench 8’ (2.4m) Step Ladder (Included) Carpenters Level 7/16" (11mm) & 1/2" (13mm) Safety Glasses Ratchet with extension Carpenters Square Adjustable Wrench Adult Helpers Claw Hammer 7/16" (11mm) & 1/2" (13mm) Drill Bits (up to 3/8”... - Page 8 About our wood Spimbey Play Systems uses only premium playset lumber, ensuring the safest product for your children’s use. Although we take great care in selecting the best quality lumber available, wood is still a product of nature and susceptible to weathering which can change the appearance of your set.
- Page 9 OCCUPANTS WEIGHT LIMITS TOTAL WEIGHT FALL HEIGHT...
- Page 11 WOOD IDENTIFICATION...
-
Page 12: Hardware Listing
HARDWARE LISTING (Fasteners are shown in full size) - Page 13 WALLS Panels are flush to frame WALLS at ends [8 .9] Part 159 Panels are flush to frame Part 160 35" [89.9] Attach panels with #8 x 1" Wood Screw X6 Install panel Attach panels with against groove #8 x 1" Wood Screw X6 Install panel against groove SCREWS FLUSH...
- Page 14 WALLS WALLS Locate 151 under panel and centered on holes and against 183. #8 x 1" Wood Screw X3 WALLS Part 161 Locate 151 under panel and centered on holes and against 183. #8 x 1" Wood Screw X3 Part 151 Part 161 Part 151 Part 183...
- Page 15 WALLS WALLS WALLS Part 155 Part 183 Part 185 STEP 1 - ATTACH TOP AND BOTTOM PANELS FIRST STEP 2 WALLS Place panels under lap and against panel STEP 1 - ATTACH TOP AND groove in panel BOTTOM PANELS FIRST STEP 2 Place panels under Panel is flush to frame...
- Page 16 WALLS WALLS Part WALL 3 Center on seam Wall assemblies flush #8 x " Truss Head Screw Parts Required: Locate wall assemblies as shown and attach using wall brackets Parts Required: 1. Locate wall assemblies as shown and attach using wall brackets. WALL 1 X1 WALL 1 X1 pre-assembled wall x1...
- Page 17 STAND WALLS STAND WALLS 35.000 [889.0] Back Wall 32.500 35.000 35.000 35.000 [825.5] [889.0] [889.0] [889.0] Side Wall 35.000 [889.0] Door Wall Frames flush Frames flush along seams and top/bottom NOTE: IF THE PLAY HOUSE WILL BE #8 x 2.25" Wood Screw INSTALLED ONTO THE PLAY DECK XXL, IT’S RECOMMENDED TO STAND WALLS ON THE DECK 1.
- Page 18 ROOF ROOF Attach all brackets with bend in-line with edge of roof frame #8 x " Truss Head Screw 23.00" 4.50" ATTACH BRACKET TO X4 ROOF PANELS ATTACH BRACKET TO X4 ROOF PANELS Parts Required: 1. Attach (2) brackets to a roof section as shown. Attach (2) brackets to a roof section as shown.
- Page 19 ROOF ROOF Support here STEP 1 - Attach roof panel with (2) two pre-installed brackets. Hint - Additional person required to support assembly or rest assembly against hut wall. #8 x 3/4" Truss Head Screw Keep frame tight along adjacent frame the entire length Support both ends of roof...
- Page 20 ROOF ROOF HINT - FOR A WATERTIGHT SEAL, USE A EXTERIOR RATED CAULK ALONG THE SEAMS IN THE ROOF Two people required to lift and place Two people required to lift and place the roof assembly onto the hut. The roof will rest on the corners of the hut All corners of the hut walls should be inline with the seam in the roof panel frame when the roof assembly is resting on the hut...
- Page 21 TARPS Parts Required: 1. Attach Tarp door and window tarps as shown. Window Tarp X2...
- Page 22 TARPS Cutouts must be larger than 9.00 [22.9] DO NOT ADD CUTOUTS TO TRAP DOOR TARP Parts Required: 1. Cutout designs in the window tarp. Window Tarp X2 2. Maintain size shown for safety.
- Page 23 PLAY HOUSE INSTALLED ON DECK XXL Parts Required: 1. Secure the playhouse to the Deck XXL as shown. 306 Bracket X4 2. If the screws protrude below the deck add extra washers (Included)
-
Page 24: Warranty
Spimba Inc.(dba. SPIMBEY) guarantees its products meet applicable standards only when used as directed under normal operation or service. Spimba Inc.(dba. SPIMBEY) warrants its products, to the Customer, to be free from defects in material and workmanship under normal and proper usage.
Need help?
Do you have a question about the 2002 and is the answer not in the manual?
Questions and answers