Iphone And Ipod & Video Output - iLive ITP100B User Manual

Iphone anD IpoD & VIDeo output
Docking an iphone/ipod
1 Press the top right corner of the
SoFt eJect Dock For iphone/
ipod to expose the dock for iPhone/
iPod.
2 Swing the StaBILIty LeVer down
to stabilize the bar speaker while
docking an iPhone or iPod.
3 Locate the numbered bracket that
fits the iPhone/iPod model that will
be docked.
Each included bracket has a number
on it, indicating which iPhone/iPod
model that bracket is compatible with.
See the separate bracket chart page to
identify which bracket is needed.
4 Snap the bracket into place over the
iPhone/iPod connector in the dock.
5 Connect the iPhone or iPod to
the connector inside the Dock for
iPhone/iPod.
When the speaker is plugged in, using
AC power, the docked iPhone or iPod
will charge.
playing an iphone/ipod
1 Follow the instructions for DOCKING
AN iPhone/iPod.
2 Press the power button to turn the
bar speaker on.
3 Press the Source/cLock aDJuSt
button to switch to iPOD MODE.
4 Press the pLay/pauSe button on the
remote to begin playing music from
a docked iPhone or iPod.
10 iLive
using the Video output
1 Connect an RCA video cable (not
included) to the VIDeo output on
the bar speaker and the video input
on a television.
2 Power the bar speaker on and press
the Source/cLock aDJuSt button
to switch to iPod mode.
3 Follow the instructions for DOCKING
AN iPhone/iPod
Make sure the iPhone or iPod's TV OUT
setting is set to ON.
4 Adjust the connected television to
the correct input setting.
5 Video played through the docked
iPod will now play through the
connected television.
StaBILIty
LeVer