Using The Ip99 - iHome iP99 Owner's Manual

Connect iP99 to Power Source
Plug the AC adaptor cable into the
in to operate. The iP99 does not operate on batteries.
Setting the Clock
a) Press and hold the
b) Turn the Set Wheel to select your time zone.
c) Press the Time Zone Button again. The clock will display the current time in your time zone.
d) To adjust the time for Daylight Saving Time, slide the
Slide to -1 to turn the clock back 1 hour.
To Set Clock Manually
a) Slide the DST switch to adjust for Daylight Saving Time (+1 for daylight saving time, -1 for standard time).
b) Press and hold the
c) Turn the Set Wheel until the current time is displayed (a PM indicator appears when time is set to PM; there is no AM indicator).
d) Press the Clock Adjust Button to accept the time. The year display will flash.
e) Turn the Set Wheel to adjust the year and press the Clock Adjust Button. The date display will flash.
f) Turn the Set Wheel to adjust the date and press the Clock Adjust Button. Two beeps will indicate clock setting is complete.
Using the Alarms
The iP99 has two independent alarms. Each can be set to wake you to iPod (iPhone), iPod (iPhone) playlist, radio or buzzer at separate
times.
Setting the Alarms
a) Press and hold the
b) Turn the Set Wheel to set the desired alarm time.
c) Press the Alarm Button again and turn the Set Wheel to select having the alarm come on all week (7 days), only weekdays (5 days)
or just weekends (2 days).
d) Press the Alarm Button again and then turn the Set Wheel to select a wake source: Buzzer, iPod (iPhone), iPod (iPhone) playlist* (PLYLST)
or Radio (last selected station).
* PLYLST. To wake to an iPhone/iPod playlist, you must create a playlist in iTunes called 'iHome' and import it to your iPhone/iPod.
When PLYLST is set as your wake to source, the iP99 will wake to random songs in your iHome playlist.
Note: If wake to source is set to iPod (iPhone) or playlist and iPhone/iPod or playlist is not present, the iP99 defaults to buzzer alarm.
Arming and Disarming Alarm (Turn Alarm Function ON and OFF)
a) Press an Alarm Button to preview current alarm time(s). Press again to arm or disarm alarm function. When armed, the related alarm
icon appears in the display.
Resetting the Alarm to Come on the Next Day
a) When the alarm is sounding, press the
Snooze
a) Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again after the selected snooze
time. Snooze can be pressed several times during the 2 hour alarm cycle.
b) To adjust the snooze time, during normal mode press and hold the
to adjust snooze time from 1 to 29 minutes.
Sure Alarm
The iP99 has a sure alarm feature so the buzzer alarm will still sound in the event of power failure, if backup batteries are installed.
iPhone/iPod
Playing and charging your iPhone or iPod
a) Place proper insert for your iPhone/iPod (see insert table under Quick Start) in
your iPhone/iPod will charge until fully charged. Unit will not overcharge iPhone/iPod.
b) Press the Play/Pause Button to play iPhone/iPod, and again to pause. If your iPhone or iPod Touch is in video mode, you may see
the "locked" slider on the iPhone/iPod display. If so, you will need to unlock your iPhone/iPod.
c) Turn Volume Wheel to adjust iP99 volume up or down
d) Press the EQ Button to select Treble, Bass, SRS WOW sound or Balance. Turn the Set Wheel to adjust settings. EQ settings for
iPhone/iPod and radio mode are independent.
e) Press Alarm Reset/Power Button to turn iP99 and iPhone/iPod off.
Note: If you dock an iPhone/iPod with a drained battery, it may take up to 6 minutes of charging before the iPhone/iPod will
respond.
AC Adaptor Jack and the other end into a standard 120 VAC wall socket. Adaptor must be plugged
Time Zone Button until the display flashes.
Clock Adjust Button located on back of the unit. The clock display will flash.
Alarm 1 or Alarm 2 Button until the alarm time flashes.
Alarm Reset/Power Button to stop the alarm and reset it to come on the following day.

Using the iP99

DST switch to +1 to advance the time 1 hour.
Snooze/Dimmer Button until the display flashes. Use the Set Wheel
4
Dock, then gently dock iPhone/iPod. When docked,