Advertisement
1.How to use
Maintain a 10-40° bevel angle in the horizontal direction of the scanner and
bar code for optimal scanning results.
Aiming - Correct
Aiming - Wrong
2.Scanner Features
LED Indicator
Scan Window
Beeper
Scan Trigger
Data Port
3.Interface cable's Installing and Removing
Data cable connection:
1. The data cable on the bottom of the scanner is not allowed to be pulled
out;
2. Because the data cable is integrated with the scanner interface, the data
cable cannot be pulled out.
4.Packing List
1* Scanner.
1* Interface Cable.
1* Quick Start Guide.
If you need to use the detailed manual, Please contact the bar code
scanner vendor.
How to use the parameter barcode: scan corresponding bar codes to set
up the scanner and the scanner will beep once.
5.System Setting
1.Reading the "Enable configuration code" barcode enables the barcode scanner to open
and configure by reading a specific barcode (configuration code function). After the
function is turned on, the parameters of the barcode scanner can be modified by reading
one or more configure codes.
2.After reading the "Disable configuration code", most of the configuration code
processing functions will be disabled by the barcode scanner. In this state, only the "
Enable configuration code" code can be read and processed.
Enable Configuration Bar code
Disable configuration Bar code
6.Common settings
The content of the configuration code can be output. After reading the "output configuration
code content" and setting it successfully, the content will be output to the host when reading
the configuration code; after reading the "no output configuration code content" and setting
successfully, the barcode scanner will no longer output the configuration code content. After
the barcode scanner is restarted, no matter what the previous settings are, it will return to the
state of "no output of configuration code content".
Transmit Configuration Bar Code Data
Do not Transmit Configuration Bar Code
Data
7.Common Setting
Configuration Bar Code
Restore to Factory Default
Note: please use the "restore factory default" function carefully. After reading this configuration
code, you will lose the current parameter setting and replace it with the factory default value.
8.User default settings
1.In addition to the factory default settings, you can save the settings you often use as user
default settings.
2.Reading the "save current settings as user default settings" code will save all parameters
of the barcode scanner as the user's default settings. If there is user default configuration
information on the barcode scanner, the current configuration information will replace the
original user default configuration information after this operation. Reading "restore to user
default settings" switches the module to the state of user default settings.
(Note: after restoring the factory default settings, the previously saved user default settings
will not be lost.)
Save current settings as user default
Restore to user default
9.Interface setting
Serial port
HID-KBW
USB COM
Advertisement
