Spectra Geospatial Ranger 5 User Manual
  1. Manuals
  2. Brands
  3. Spectra Geospatial Manuals
  4. Data Loggers
  5. Ranger 5
  6. User manual

Spectra Geospatial Ranger 5 User Manual

Powered by android 10
Hide thumbs
Table of Contents

Advertisement

Quick Links

Spectra Geospatial
Ranger 5 Data Collector
Powered by Android
USER GUIDE
Version 1.00
Revision A
June 2021
TM
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ranger 5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Spectra Geospatial Ranger 5

Summary of Contents for Spectra Geospatial Ranger 5

  • Page 1 Spectra Geospatial Ranger 5 Data Collector Powered by Android USER GUIDE Version 1.00 Revision A June 2021...
  • Page 2 © 2021, Trimble Inc. All rights reserved. Spectra Geospatial is a Division of Trimble Inc. Spectra Geospatial and the Spectra Geospatial logo are trademarks of Trimble Inc. or its subsidiaries. Ranger is a trademark of Trimble Inc., registered in the United States and in other countries.
  • Page 3 To recycle Trimble WEEE products call +31 497 53 24 30, and ask for the "WEEE Associate". or mail a request for recycling instructions to: Trimble Europe B.V. & Trimble International B.V. Industrieweg 187a 5683 CC Best The Netherlands Spectra Geospatial Ranger 5 Data Collector User Guide | 3...
  • Page 4 à utiliser cet appareil en vertu des règles d'Industrie Canada. Licence exempt This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and Spectra Geospatial Ranger 5 Data Collector User Guide | 4...
  • Page 5 This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. Spectra Geospatial Ranger 5 Data Collector User Guide | 5...
  • Page 6 – product name, part number and serial number; – proof of purchase; – an explanation of the problem. The customer service representative may need additional information from you depending on the nature of the problem. Spectra Geospatial Ranger 5 Data Collector User Guide | 6...
  • Page 7 Australian Consumer Law. Official Language THE OFFICIAL LANGUAGE OF THESE TERMS AND CONDITIONS IS ENGLISH. IN THE EVENT OF A CONFLICT BETWEEN ENGLISH AND OTHER LANGUAGE VERSIONS, THE ENGLISH LANGUAGE SHALL CONTROL Spectra Geospatial Ranger 5 Data Collector User Guide | 7...

  • Page 8: Table Of Contents

    About Sleep state Waking and unlocking the device Restarting the device Turning off the device Checking the battery charge levels and LED status LED charging status Checking the charge level of the batteries Spectra Geospatial Ranger 5 Data Collector User Guide | 8...
  • Page 9 Making your battery last longer Using the touchscreen Switching between finger, glove and stylus mode Using the stylus Main touchscreen input gestures and functions supported on the Ranger 5 data collector Display settings: adjusting the backlight Configuring Adaptive brightness Manually adjusting the backlight brightness Display settings: screen auto-rotation...
  • Page 10 Using USB Type-C locking cables Connecting to Bluetooth accessories Turning Bluetooth on or off Pairing and connecting a Bluetooth device with the Ranger 5 data collector Connecting to RS-232 peripherals Transferring data between your Ranger 5 data collector and another computer...

  • Page 11: Safety Information

    Do not expose to temperatures above +70 °C (+158 °F). Spectra Geospatial Ranger 5 Data Collector User Guide | 11...

  • Page 12: Power Supply Safety

    Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify this device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty. Spectra Geospatial Ranger 5 Data Collector User Guide | 12...

  • Page 13: Safe Environments Of Use

    Keep this device at least 5 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Spectra Geospatial Ranger 5 Data Collector User Guide | 13...

  • Page 14: Caring For Your Device

      Keep it out of the sun when not in use. Do not store the Ranger 5 data collector in direct sunlight for a long time unnecessarily. Ultraviolet light and excessive heat from sun-loading heat can damage the display.

  • Page 15: Product Specifications

    The Ranger 5 data collector is designed to work in ambient temperatures between -30 °C and +60 °C (- 22 °F and +140 °F) and to be stored in temperatures between -40 °C and +70 °C (-40 °F and +158 °F).
  • Page 16 5V/9V, 3A charging, USB-PD compliant with Type C connector Audio 1W Mono Speaker Dual Microphones with noise cancelling technology Bluetooth or USB-C headsets supported External speaker / USB-C port for external headsets microphone Bluetooth headsets supported Spectra Geospatial Ranger 5 Data Collector User Guide | 16...
  • Page 17 Korea (KCC), Taiwan (NCC), UAE United Arab Emirates (GCC), Mexico (IFETEL), Brazil (ANATEL), India (ETA-SD), China (SRRC+NAL) and South Africa (ICASA) Security Qualcomm SDA660 Hardware Backed Encryption, Quarterly Android Security Patches, Storage Encryption, and TLS 1.3 Spectra Geospatial Ranger 5 Data Collector User Guide | 17...
  • Page 18 Salt Spray: ASTM B117 5% salt solution, 96 hours Configuration Options: x1 EMPOWER module bay supports: EMPOWER Modules   EM100 GNSS Receiver Module   EM120 2.4 GHz Receiver Module   EM11x Barcode/RFID Modules   Custom modules Spectra Geospatial Ranger 5 Data Collector User Guide | 18...
  • Page 19 Trimble Access™ version 2021 and later Trimble Siteworks Positioning System version 1.40 and later Spectra Geospatial Origin Trimble 3Log ScaleWiz Trimble Unity Remote Monitoring and Work Management Software Trimble GasOps Spectra Geospatial Ranger 5 Data Collector User Guide | 19...

  • Page 20: Introduction

    Quick Start Guide, which you receive in the box with the device. Even if you have used other Spectra Geospatial handheld field computers, data collectors or survey controllers before, Spectra Geospatial recommends that you spend some time reading this guide to learn about the special features of the product.

  • Page 21: Registration

    To receive information regarding updates and new products, contact your local dealer or go to https://mytrimbleprotected.com/cc/productsRegistration.html. To register your device, you will need the serial number—a unique 12 digit number for your Ranger 5 data collector (for example, JAJ201300096) The serial number (along with the Regulatory label) is on a label inside the SIM card compartment on the back of the device;...

  • Page 22: In The Box

    The Ranger 5 data collector uses 5/9V, 3A charging   Size: 58 X 46 X 28 mm 2 m (6.56 feet) USB-Type C (male) to USB-Type C (male) USB 2.0 cable for charging and data transfer Spectra Geospatial Ranger 5 Data Collector User Guide | 22...

  • Page 23: Replacement And Spare Or Optional Accessories

    Failure to use Spectra Geospatial approved accessories could result in fire, electric shock, or other injury, or damage to the handheld computer and/or other property. For more information refer to Safety information, page A wide range of replacement and optional accessories are available to purchase for the Ranger 5 data collector, including:  ...
  • Page 24 Trimble EM111 1D/2D Barcode Imager & UHF 902-928 MHz RFID – NA   Trimble EM111 1D/2D Barcode Imager & UHF 865.6-867.6 MHz RFID – EU   Trimble EM112 1D/2D Barcode Imager & UHF 902-928 MHz RFID with AEI – NA Spectra Geospatial Ranger 5 Data Collector User Guide | 24...

  • Page 25: Parts Of The Ranger 5 Data Collector

    Trimble EMPOWER module bay LEDs left to right; Fn, Ctrl, Search Cover for SIM card slot Speakers (x2) USB-C port, bottom of device under port cover AGr LED         Spectra Geospatial Ranger 5 Data Collector User Guide | 25...

  • Page 26: Setting Up The Device

    Inserting a MicroSIM card (optional) If your Ranger 5 data collector is equipped with a 4G LTE modem, you will need a data plan and microSIM card from your local cellular service provider to use cellular data. If you are unsure, check with your mobile operator.
  • Page 27  4.  Slide the microSIM card into the slot in the orientation shown on the microSIM door.  5.  Close the microSIM door, making sure it clicks shut.  6.  Replace the cover and tighten the 4 screws using the Philips screwdriver. Spectra Geospatial Ranger 5 Data Collector User Guide | 27...

  • Page 28: Tethering The Stylus

    Installing a screen protector The Ranger 5 data collector is fitted with a mechanically strengthened glass touchscreen which is highly resistant to abrasion and impact damage. However to ensure maximum protection, it is recommended that you use a Spectra Geospatial-approved glass Ranger 5 data collector screen protector.
  • Page 29 Setting up the device  3.  Polish and dry the screen with the lint-free cleaning cloth supplied.  4.  Remove any dust specs with the supplied dust sticker. Spectra Geospatial Ranger 5 Data Collector User Guide | 29...
  • Page 30 For more information on where to purchase the correct screen protector for your device, contact your local Spectra Geospatial reseller. Spectra Geospatial Ranger 5 Data Collector User Guide | 30...

  • Page 31: Attaching The Pole Bracket (Optional)

    To remove the Ranger 5 data collector from the pole clamp, on the back of the locking mechanism, pull the lever to release the Ranger 5 data collector.

  • Page 32: Attaching The Handstrap

    Sleep state. For more information, see About Sleep state, page NOTE – You need to re-calibrate the compass after installing or removing the EMPOWER module. For more information, see Calibrating the compass, page Spectra Geospatial Ranger 5 Data Collector User Guide | 32...
  • Page 33 Setting up the device To attach an EMPOWER module to the Ranger 5 data collector:  1. Hook the EMPOWER module onto the back of the device, ensuring that the slots on the top of the device line up with those on the EMPOWER module.

  • Page 34: Getting Started: Basic Operation

    Using the onscreen keypad Using a USB or Bluetooth mouse This section covers some explains some basic features to get you started using your Ranger 5 data collector. When you start your device for the first time, the Android operating system takes you through some basic setup steps;...

  • Page 35: Shelf Mode: Charging The Device For The First Time

    Shelf mode: charging the device for the first time The Ranger 5 data collector ships in a low power Shelf mode to conserve power. While in Shelf mode, the device will only turn on when a charging source is connected. Once the device is plugged into a charging source and powered on, it is taken out of Shelf mode.

  • Page 36: Turning The Device On, Off

    Swipe up on the touchscreen to enter a PIN, password, or pattern, if one has been set. About Sleep state If the Ranger 5 data collector is unplugged and stationary for one minute (default setting), the screen turns off and the device goes into a power-saving Sleep state, called Android Doze. Doze reduces battery consumption by deferring background CPU and network activity for apps when the device is unused for long periods of time.

  • Page 37: Waking And Unlocking The Device

    The Ranger 5 data collector is powered by internal batteries which are not removable. It takes approximately 3.5 hours to charge the Ranger 5 data collector internal batteries from an empty state using the AC adapter and USB-C to USB-C cable included in the packout.

  • Page 38: Charging The Batteries

    Connect one end of the USB-C to USB-C cable to the USB-C port located on the AC adaptor.  3. Connect the other end of the USB-C cable to the USB-C port on the Ranger 5 data collector.  4. Plug the power supply into an electrical outlet.
  • Page 39 About Sleep state, page For more information on making your battery last longer, refer to the help topic Get the most life from your battery on the google.com support site. Spectra Geospatial Ranger 5 Data Collector User Guide | 39...

  • Page 40: Using The Touchscreen

    Spectra Geospatial recommends that you use the Ranger 5 data collector stylus accessory. There are many other capacitive touch styli available that will work with the Ranger 5 data collector as long as they have a rubber tip; however the stylus available as an accessory is tuned for the Ranger 5 data collector display and it fits into the stylus holder.

  • Page 41: Main Touchscreen Input Gestures And Functions Supported On The Ranger 5 Data Collector

    Swipe up to close the Notifications bar. screen. Swipe in from the Left edge swipe opens Google search. left or right edge Right edge swipe opens other Home screens. of the screen. Spectra Geospatial Ranger 5 Data Collector User Guide | 41...

  • Page 42: Display Settings: Adjusting The Backlight

    You can also access the backlight slider by pressing Fn + 7. Display settings: screen auto-rotation The Ranger 5 data collector is equipped with orientation sensors that can detect if your device is in portrait or landscape orientation. The operating system can automatically adjust the display to match your device orientation, or you can lock the orientation.

  • Page 43: Using The Onscreen Keypad

    You can still use the physical keyboard while the virtual keyboard setting is on. Using a USB or Bluetooth mouse You can attach a physical keyboard, mouse and other peripherals to your Ranger 5 data collector via USB or Bluetooth. For more information see...

  • Page 44: Using The Integrated Keyboard

    Using the integrated keyboard The Ranger 5 data collector has a full built-in QWERTY keyboard. The keyboard is similar in most ways to a standard PC keyboard; there are some differences due to the keyboard's small physical size, and some special features have been added to support users’...

  • Page 45: Main Keyboard Keys

    The Numeric Keypad is locked to Num Lock by default; the 0 to 9, decimal point (‘.’) and minus (‘-’) keys perform the same as the numeric keyboard on a standard PC keyboard. Spectra Geospatial Ranger 5 Data Collector User Guide | 45...
  • Page 46 Power key. Turn the screen on / off. Press-hold the Power key for a couple of seconds to quickly access settings to power off or restart the device, capture a screenshot or place the device into Shelf mode Using Shelf mode, page Spectra Geospatial Ranger 5 Data Collector User Guide | 46...

  • Page 47: Configuring Built-In Keyboard Settings

    On, the device's ambient light sensor is used to keep the backlight from turning on in well lit areas.   Backlight brightness. Move the slider to adjust the brightness of the backlight (right = brighter, left = dimmer). Brighter settings consume more power than dimmer settings. Spectra Geospatial Ranger 5 Data Collector User Guide | 47...

  • Page 48: Modifier Keys And Sticky Keys: Modes And Settings

    Sticky keys mode: Temporarily latch modifier key when pressed. Pressing and releasing a modifier key one time latches the modifier key state down until a non-modifier key is pressed at Spectra Geospatial Ranger 5 Data Collector User Guide | 48...

  • Page 49: Keyboard Status Leds

    There are 8 LEDs on the keyboard, including five Modifier / Sticky key LEDs. The Sticky key LEDs represent the sticky state of the Modifier key it is located above. Spectra Geospatial Ranger 5 Data Collector User Guide | 49...
  • Page 50 To turn off Cursor Navigation mode and turn on the Numeric function, press Fn + “.”. Modifier keys and Sticky keys: modes and settings, page 48 for more information. Spectra Geospatial Ranger 5 Data Collector User Guide | 50...

  • Page 51: Using The Android Operating System

    Shelf mode: charging the device for the first time, page Press the Power key to turn on the Ranger 5 data collector. The Android operating system will guide you through the setup process. The first time you use the Ranger 5 data collector, you’ll be prompted to set up a Wi-Fi network and a Google Account to use with your device.

  • Page 52: Add A Google Or Other Account

    Tap the account you want to remove.  4. Tap REMOVE ACCOUNT.  5. If this is the only Google Account on the device, you'll need to enter your device's pattern, PIN, or password for security. Spectra Geospatial Ranger 5 Data Collector User Guide | 52...

  • Page 53: The Android Interface

    When you turn on your device, the main Home screen appears. The Home screen is the primary screen for accessing all of the Ranger 5 data collector features on the device. You can add and customize Home screen(s) by adding app shortcuts and widgets (an at-a-glance view of the app’s most important information).

  • Page 54: Android Navigation Keys

    Wi-Fi signal strength, and how much battery charge is left. The left side shows the time and app notifications. Android navigation keys The Ranger 5 data collector includes navigation keys on the physical keyboard, so they do not appear on the screen. Status bar The Status bar shows different status icons for various functions and apps on the device.

  • Page 55: Removing An App, Shortcut, Widget Or Group From The Home Screen

    On the App info screen, select UNINSTALL to remove the app. Using the pre-installed Google apps and other apps The Ranger 5 data collector comes with a range of useful pre-installed software. The following describes some important bundled applications and summarizes what they can be used for.
  • Page 56 Calculator provides simple and advanced mathematical functions. Google Calendar is the official Google Calendar app to manage your schedule across multiple devices. Spectra Geospatial Ranger 5 Data Collector User Guide | 56...
  • Page 57 For receivers that support these functions, use the GNSS Status utility to:   view GNSS status and accuracy information for the currently selected GNSS source   set up correction sources   apply licensing options Spectra Geospatial Ranger 5 Data Collector User Guide | 57...

  • Page 58: Getting More Apps

    Getting more apps You can get apps, games, digital content and popular office apps such as Google Docs, Sheets, and Slides for your device using Google Play. Google Play is pre-installed on your Ranger 5 data collector.  1. Open Apps and tap Google Play  2.

  • Page 59: Using Wireless Networks

    Before you can send and receive data over Wi-Fi, you need to turn on Wi-Fi on your Ranger 5 data collector and connect to a wireless network.

  • Page 60: Connecting To Wi-Fi

      Install certificates. Digital certificates can identify your device for many purposes, including VPN or Wi-Fi network access.   Network rating provider. Select None or Google. Spectra Geospatial Ranger 5 Data Collector User Guide | 60...

  • Page 61: Managing Wi-Fi From The Status Bar / Quick Settings On The Home Screen

    To connect to a different network, tap the dropdown arrow then select the network you want to connect to. The Android interface, page 53 for more information on the Status bar and Quick Settings. Spectra Geospatial Ranger 5 Data Collector User Guide | 61...

  • Page 62: Working With Mobile Broadband

    Using wireless networks Working with mobile broadband The Ranger 5 data collector has an integrated cellular modem enabling you to connect to a mobile broadband network. The Ranger 5 data collector supports Worldwide LTE (where available), and is compatible with AT&T and Verizon certified 3G and 4G networks.

  • Page 63: Airplane Mode

    Airplane mode If you are traveling on an airplane, or don’t need to use wireless functions on the Ranger 5 data collector for a while, use Airplane mode to turn on or off all wireless radios with transmitting features built into the Ranger 5 data collector,including Bluetooth, Wi-Fi, Cellular, as well as any wireless radios connected to the Ranger 5 data collector such as EMPOWER modules.

  • Page 64: Working With Gnss

    SBAS corrections. The integrated receiver supports SBAS satellites under normal conditions. The Ranger 5 data collector supports most of the external Spectra Geospatial GNSS receivers, as well as the submeter Trimble EMPOWER EM100 GNSS receiver module. Refer to the documentation for the receiver you want to use, and check the specifications and connection options.

  • Page 65: Using 3Rd Party Applications

    The beam should become narrow and point in the right direction. For more information on improving your device accuracy, including the instructions on how to perform a calibration, refer to the Google Maps Help page. Spectra Geospatial Ranger 5 Data Collector User Guide | 65...

  • Page 66: Using Accessories And Connecting To Other Devices

    Other types of USB devices may require drivers from the device manufacturer. To connect a USB device, plug the device cable into the USB (type C) port on the bottom of the Ranger 5 data collector.

  • Page 67: Using Usb Type-C Locking Cables

    If a locking USB Type-C cable is required, there are many 3rd party options available. Below are the required specifications for compatible cables with the Ranger 5 data collector. The Type-C connector should be the dual screw USB Type-C locking plug type, as specified by the Universal Serial Bus Type-C Locking Connector Specification Revision 1.0 March 9,...

  • Page 68: Connecting To Bluetooth Accessories

    100 meters (328 feet). You can use Bluetooth wireless technology to connect the Ranger 5 data collector to a Bluetooth headset. Turning Bluetooth on or off  1.

  • Page 69: Connecting To Rs-232 Peripherals

    RS-232 device for instructions on setting up and using the device. Transferring data between your Ranger 5 data collector and another computer You can transfer data or files between your Ranger 5 data collector and another device. There are a number of ways you can do this, including:  ...

  • Page 70: Using Trimble Empower Modules

     1. Unlock the screen on the Ranger 5 data collector.  2. Use a USB type C data transfer cable to connect the Ranger 5 data collector to the Windows device.  3. On the Windows device, follow the prompts to set up the method you want to view and transfer files.

  • Page 71: Attaching And Removing Empower Modules

    EMPOWER module for the first time, you may need to check for updated drivers and software apps on the Ranger 5 data collector for the device to recognize and operate the module. If you need to download or update these components, you can find the apps and drivers on Google Play, which is pre-...

  • Page 72: Configuring And Controlling A Module With The Trimble Empower Hub Application

    The EMPOWER Hub is a centralized location to control and manage Trimble EMPOWER modules from one convenient, easy-to-use application. The EMPOWER Hub comes pre-installed on the Ranger 5 data collector and can be used to monitor module status and manage modules attached to your device, including:  ...

  • Page 73: Using The Cameras

    Taking photos and videos Changing camera settings Viewing photos and videos The Ranger 5 data collector is fitted with one rear facing 13MP autofocus camera with LED flash. The camera is accessible from the Camera app NOTE – The device may be shipped with a protective film covering the camera and flash windows.

  • Page 74: Changing Camera Settings

    Turn the camera flash on, off or auto.   Turn GPS location On/Off for geo-tagging.   Choose picture size up to 12 MP.   Set picture quality / resolution.   Set countdown timer. Spectra Geospatial Ranger 5 Data Collector User Guide | 74...

  • Page 75: Enable The Camera App To Access Your Location To Geo-Tag Photos

    Open the Photos app from the Apps screen.   Files app: Images captured with the Camera app are automatically accessible in the Files app. Open the Files app from the Apps screen. Spectra Geospatial Ranger 5 Data Collector User Guide | 75...

  • Page 76: Troubleshooting, Downloading Updates, And Repair

    This section contains answers to some common troubleshooting questions. If you encounter problems when using your Ranger 5 data collector, try the following troubleshooting tips to detect and solve the problem. If problems persist, contact your local distributor for support.
  • Page 77 The issue may be caused by an app that you downloaded. To see whether a downloaded app is causing the issue, you can reboot your device in safe mode. Safe mode temporarily disables all downloaded Spectra Geospatial Ranger 5 Data Collector User Guide | 77...

  • Page 78: Empower Module Issues

    It is possible the contacts between the module and the device are dirty, or that the module is not attached correctly. Ensure that the module contacts are clean and that the screws are tightened correctly. Refer to the Trimble EMPOWER modules documentation here www.trimble.com/empowermodules more information. Spectra Geospatial Ranger 5 Data Collector User Guide | 78...

  • Page 79: Wireless Connectivity Issues

    30 minutes then try to boot the device. If you see a battery indicator with a red charge level and charger icon, it needs to continue charging before the device can turn on. Spectra Geospatial Ranger 5 Data Collector User Guide | 79...

  • Page 80: Restarting Or Resetting The Operating System

    Erasing your data may take some time, so make sure that you plug your device into a power source before you start.  1. to open the Settings app.  2. Tap System, then tap Advanced. Spectra Geospatial Ranger 5 Data Collector User Guide | 80...

  • Page 81: Operating System And Software Updates

    Repairing your device Before you send your Ranger 5 data collector for repair, check the troubleshooting tips in this document. If you can’t solve the problem with troubleshooting, contact your local Spectra Geospatial dealer for further support.

This manual is also suitable for:

Tsc5121900

Table of Contents