Table of Contents
Advertisement
Troubleshooting
Before sending your LCD monitor for servicing, please check the troubleshooting
list below to see if you can self-diagnose the problem.
HDMI1 / HDMI2 / DP1 / DP2 Mode
Problem
No picture visible Blue
LED status
Using the OSD menu, adjust brightness and
contrast to maximum or reset to their default
setting.
Off
Check the power switch.
Check if the AC power cord is properly
connected to the monitor.
Amber
Check if the video signal cable is properly
connected at the back of monitor.
Check if the computer system is switched on
and in power saving/standby mode.
Remedy
17
Advertisement
Table of Contents
