Table of Contents
Advertisement
Attaching/Removing the base
1. Remove the monitor from the package.
2. Fasten the captive screw on the base to secure the base to the stand.
3. Place the monitor face down on a flat and stable surface covered by a
protective sheet and then install the stand with 2 screws to secure the
monitor.
4. Reverse the steps when you want to remove the base.
<STEP1>
FreeSync Premium (HDMI/DP only)
It allows a FreeSync Premium supported graphics source to dynamically adjust
display refresh rate based on typical content frame rates for power efficient,
virtually stutter free and low-latency display update.
2
<STEP3> Finished
<STEP2>
Advertisement
Table of Contents
