KAKA Industrial UB-70 Operation Manual

Operation Manual
KAKA Industrial
Specifications
UB-70:
Stock No. ......................................173201
Cold bending:
Flat steel..................70 x 6 mm(2
Square steel............16 x 16 mm(
Round steel..........................18 mm(
Angle steel..............60 x 8 mm(2
Warm bending:
Flat steel.................70 x 10 mm(2
Square steel.........18 x 18 mm(
Round steel...........................20 mm(
Angle steel..............70 x 15 mm(2
UB-100:
Stock No. ......................................173202
Cold bending:
Flat steel...................100 x 5 mm(4"×
Square steel............16 x 16 mm(
Round steel.............................18 mm(
Angle steel..............60 x 8 mm(2
Warm bending:
Flat steel...................100 x 10mm(4"×
Square steel.........18 x 18 mm(
Round steel...........................20 mm(
Angle steel..............100 x 12 mm(4"×
Unpacking
The UNIVERSAL BENDER UB-70 &
UB-100 is shipped from the manufacture
in
Thoroughly inspect the product upon
3 / "× 1 / ")
4 4
/ "× / ")
5 5
opening the package. After unpacking the
8 8
/ ")
11
unit, carefully inspect for any damage that
16
/ "× / ")
3 5
8 16
may have occurred during transit.
If damage has occurred, shipping damage
3 / "× 3 / ")
4 8
claims must be filed with the carrier and
11 / "× 11 / ")
16 16
/ ")
3
are the responsibility of the user.
4
/ "× / ")
3 5
Check for completeness. Immediately
4 8
report missing parts to dealer.
/ ")
3
16
/ "× / ")
5 5
8 8
/ ")
3
4
3 / "× 5 / ")
8 16
/ ")
3
8
/ "× / ")
11 11
16 16
/ ")
3
4
7 / ")
16
SAVE THESE INSTRUCTIONS
Thank you for purchasing
BENDER UB-70/UB-100
to operate your new tool please read
these instructions thoroughly. You will
need these instructions for the safety
w a r n i n g s , pr e c a u t i o n s , as s e m b l y,
- 1 -
®
a carefully packed
WARNING
The warnings, cautions and instructions
discussed in this instructions or situations
that could occur. It must be understood by
the operator that common sense and
caution are factors which cannot be built
into this product, but must be supplied by
the operator.
UB-70/UB-100
Carton box.
UNIVERSAL
Before attempting
.