Advertisement
Power Your CD Player
Plug the AC/DC power adapter (not included) into the DC Input on the CD
player and a standard power outlet.
Please remove batteries if
using the power adapter.
Using Battery Power
Requires 2 AA batteries (included).
Using Earbuds
To use earbuds (included) insert the earbuds into the 3.5mm headphone jack
on the side of the CD player.
Dynamic Bass Boost
System
Functions & Controls
Loading a CD
1.
Slide the Open Switch to the right to open the CD door.
2.
Load a CD into the player, label side up.
3.
Close the CD door.
Playing a CD
1. Press the PLAY/PAUSE button to begin playing the loaded CD.
Programming a CD
1. Press the STOP button to stop the CD during play.
2. Press the PROG/+10 button, "P-01" will begin to blink on the display.
3. Press the SKIP/SEARCH buttons to select the track you wish to
program.
4. Press the PROG/+10 button to save the selected track to the program.
5. Repeat steps 3 and 4 to program up to 20 tracks to play in the order
they are programmed.
6. Press the PLAY/PAUSE button to begin playing the programmed tracks.
Bluetooth Transmitter Mode
Pairing to a Bluetooth Speaker
The CD player can act as a Bluetooth transmitter to a Bluetooth speaker.
Follow the below steps to connect to a Bluetooth speaker and play music
from a loaded CD. When using Bluetooth, there is no output from the
headphone jack.
When the CD player is stopped for approximately 30 seconds, the power will
automatically turn off. The user will need to repeat below connection steps to
play in Bluetooth Mode again.
1. Press and hold the MODE/
Mode.
2. When the CD player is in Bluetooth Mode, "BT" will be seen flashing on
the bottom right corner of the LCD display. The pairing process could
take up to 30 seconds. For best results, stay within 3 ft. of the Bluetooth
speaker you are pairing to.
3. When the Bluetooth connection is made, the "BT" icon on the LCD
display will stop flashing and turn solid. Your Bluetooth speaker should
indicate when the connection has been made as well. Note: The unit will
connect to the closest Bluetooth speaker that is near it.
4. Begin playing music on the CD player to hear it on the connected
Bluetooth speaker. If you are connected to a Bluetooth speaker with a
play/pause button and do not hear audio, try pressing the play/pause
button.
5. When you are finished listening, press the STOP button to stop the
player.
6. Press and hold the MODE/
to switch to Bluetooth Transmitter
to turn off Bluetooth transmitter mode.
Advertisement
