Advertisement
Rev. 8/24/2021
RECORD OF SATISFACTORY CONDITION (THE "RECORD")
After the unit is assembled and/or installed, make a detailed record of its condition. Include
observations about all features: pivot points, welds, frame elements, especially features in contact with
the ground, fasteners (anchor bolts, bolts, nuts, washers, etc.) and casters/wheels. Thoroughly
photograph the unit from multiple angles so that all features are clearly imaged. Photograph all labels
applied to the product. Describe where each label is located. Collate all photographs and writings into a
single file. This file is a record of the product in satisfactory condition. Compare the results of each
inspection to this RECORD to determine if the unit is in satisfactory condition. Do not use the product
unless it is in satisfactory condition
INSPECTIONS AND MAINTENANCE
Compare inspection results to the RECORD. Do not continue to use the product unless every
component is in
SATISFACTORY
do not constitute changes from satisfactory condition. However, touchup paint should be applied to all
affected areas as soon as damage occurs. Contact
parts. Contact information is provided on the cover page of this manual.
Inspect the following at least once per month:
1. Surfaces – Check all surfaces of the product for dirt or other matter, especially fluids. Clean the
surfaces of the stand.
2. Hardware, fasteners – Examine hardware & fasteners (anchor bolts and sleeves, bolts, nuts, pins,
& clips). Replace damaged/worn hardware.
3. Examine the frame for wear, breaks, corrosion/rust, metal fatigue, and other forms of damage (e.g.
impact damage).
4. Overall structure – Examine the whole structure for rusting or metal erosion, rot, thinned regions. In
particular, examine pivot points, and ground-contacting elements. If rusting is purely superficial,
remove the rust/corrosion. Clean the affected area and apply touchup paint. If rusting, rot, or
thinning has weakened the material, contact
Copyright 2021 Vestil Manufacturing Corp.
CONDITION. Cosmetic changes, like damaged paint/powder coat
TECHNICAL SERVICE
TECHNICAL SERVICE
RWC, MANUAL
to order replacement
for advice.
Page 7 of 8
Advertisement
