Advertisement
Rev. 8/24/2021
SIGNAL WORDS
This manual uses SIGNAL WORDS to indicate the likelihood that a particular action will cause
personal injuries or property damage. Signal words also specify the level of seriousness of injury if
the product is misused in the ways described. The following signal words are used in this manual.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH
or SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
Identifies a hazardous situation which, if not avoided, COULD result in
DEATH or SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR
or MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation
that might damage the product.
SAFETY INSTRUCTIONS
Vestil strives to identify all foreseeable hazards associated with the use of its products. Material
handling is dangerous and no manual can address every conceivable risk. Ultimately, the most
effective way to prevent injury is to apply sound judgment whenever using this device.
Improper or careless use of this product could result in death or serious personal injuries.
•
Read and understand the entire manual before assembling, installing, using or servicing the product.
Read the manual to refresh your understanding of proper use and maintenance procedures.
•
DO NOT attempt to resolve any problem(s) with the product unless you are both authorized to do so
and certain that it will be safe to use afterwards.
•
DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil.
Unapproved modifications automatically void the
unsafe to use.
•
Inspect the product according to the instructions in
the product unless it is in
Proper use, maintenance, and storage are essential for this product to function properly.
o Always use this product in accordance with the instructions in this manual and consistent with any
training relevant to machines, devices, etc. used in conjunction with this product.
o Keep the product clean & dry. Lubricate moving parts.
o FOR HYDRAULIC UNITS: Do not use brake fluid or jack oils in the hydraulic system. If oil is
needed, use an anti-wear hydraulic oil with a viscosity grade of 150 SUS at 100°F, (ISO 32 cSt @
40°C), or Dexron transmission fluid.
o Contact the manufacturer for SDS documentation.
USING THE PRODUCT
1. Chock height should be no less than ¼ of wheel outside diameter.
2. Use more than 1 chock if parked on an incline.
3. Place chocks behind downhill side of the wheels.
Copyright 2021 Vestil Manufacturing Corp.
SATISFACTORY
CONDITION.
LIMITED WARRANTY
INSPECTIONS &
MAINTENANCE. DO NOT use
RWC, MANUAL
and might make the product
Page 2 of 8
Advertisement
