anko ABH100 Instruction Manual
anko ABH100 Instruction Manual

anko ABH100 Instruction Manual

Bladeless ceramic fan heater

Advertisement

Bladeless Ceramic Fan Heater
ABH100
Rev 02
To ensure proper operation of this device, please read this instruction manual carefully before using
the device and keep it for further reference.
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ABH100 and is the answer not in the manual?

Questions and answers

Summary of Contents for anko ABH100

  • Page 1 Bladeless Ceramic Fan Heater Instruction Manual ABH100 Rev 02 To ensure proper operation of this device, please read this instruction manual carefully before using the device and keep it for further reference.
  • Page 2 General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
  • Page 3 • Do not connect the appliance to mains supply until completely assembled and adjusted. • Ensure hands are dry before handling the plug or main unit. • Ensure appliance is on a flat, stable, heat-resistant surface. • Do not operate with cord set coiled up as a heat build up is likely, which could be sufficient to become a hazard.
  • Page 4 Operating your Heater Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions. WARNING: In order to avoid overheating or fire, do not cover the heater. WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.
  • Page 5 Operating your Heater Remote Control and General Operation Control Panel Remote Control IMPORTANT! Ensure heater is on a flat, stable, heat-resistant surface. Once the heater is in a safe operating position and all switches are in the off position, insert the power plug into the mains outlet.
  • Page 6 4. Pressing the button for a third time, the heater will begin to operate in High Heat Mode and the indicator will light up. In this mode “02” will display on screen and flash 4 times, then the screen reverts to showing the current room temperature.
  • Page 7 Safety Devices This appliance has three protection devices: • Tilt Switch - this will automatically turn the appliance off if the appliance is not in the correct operating position. • Resettable Thermal Link - this will automatically disconnect the power to the appliance at a pre-set overheat temperature.
  • Page 8 12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.

Table of Contents