Subscribe to Our Youtube Channel
Related Manuals for anko DL03L
Summary of Contents for anko DL03L
- Page 1 Convector Heater DL03L User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Important Safeguards
SAFEGUARDS IMPORTANT When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Read all instructions before using the appliance. To avoid fire or shock hazard, plug the appliance directly into a 220-240V AC electrical outlet. - Page 3 Use appliance only for intended household use only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by the manufacturer cause hazards.
-
Page 4: Product Specification
SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY PRODUCT SPECIFICATION PACKAGE CONTENTS 1 Main Unit 1 Instruction Manual 2 Moulded Feet 8 Screws for foot assembling 1 Remote Control NOTE: Confirm all parts before disposing of carton. Safely dispose of all plastic bags and other packaging components. -
Page 5: Battery Installation (Remote Control)
REMOTE CONTROL AND GENERAL OPERATION ON/OFF Button Heating mode 3 & 4. Timer Button 5 & 6. Temperature Control Button Increase the Temperature and Timer setting Decrease the Temperature and Timer setting BATTERY INSTALLATION (REMOTE CONTROL) - First Time Use Remove (pull) and discard the insulation film as shown on figure on the right. -
Page 6: Battery Precautions
BATTERY PRECAUTIONS Follow these precautions when using a battery in this device: 1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. 3. - Page 7 DIGITAL SCREEN AND REMOTE CONTROL OPERATION THIS APPLIANCE MUST BE EARTHED. • Ensure the ON/OFF control switch is in the OFF (position ‘0”) position before connecting to mains power. • Make sure the appliance, including the plug and cord, is not damaged. •...
-
Page 8: Cleaning And Maintenance
hours. The timer will increase or decrease by 1 hour after each press. In the timer setting, the timer symbol will light on and show on the display. The setting will be memorized and confirmed after 3 seconds. You also can set temperature and power for turn on timer. -
Page 9: Technical Data
Store in a safe place When not in use, disassemble and store your appliance and instruction manual in a safe and dry place away from moisture and heat. NOTE: Always clean and store away your appliance with this instruction manual when not in use.
Need help?
Do you have a question about the DL03L and is the answer not in the manual?
Questions and answers