Nevir NVR-715MCDU User Manual page 32

(3)After selecting the desired track, press the [PROGRAM] key once again to store it in memory. For MP3
discs you can program up to a maximum of 99 tracks while in CD disc a maximum of 20 tracks can be
programmed.
Repeat steps (2) to (3) for the rest of the tracks.
(4)If the [STOP] key is pressed during the program mode, the selected tracks will be stored in the memory
and the unit will return to STOP mode (Continuous Play mode)
(5)If the [PLAY] key is pressed during the program mode, the unit will start the program PLAY mode.
Playback will start from P01 track.
Erasing a Program
Follow the below steps to delete a Program:
- While playing, press the STOP button twice.
- Open the CD door
- Select any other mode.
AUX IN
NVR-715MCDU includes an Aux in jack which enables connection to any external audio device such as
MP3, Discman or Walkman.
1. Connect your external audio device to the AUX in of the micro system.
2. Select the function to AUX. Play the music from your audio device to hear it through the speakers.
3. Adjust the volume level to your desire.
Note: The Micro system buttons cannot control the external device. All functions must be operated
from the external audio device.
Power Off Erp2 function
When the unit idles on CD /AUX/USB/SD mode over 10 minutes, then the unit will switch into standby
mode automatically.
CD/MP3 PLAYER
NVR-715MCDU Micro system can playback the following formats: Audio Discs,MP3,CD-R.
Do not attempt to play CD-ROM, CDI, VCD, DVD or computer CD´s.
1. Press the function button to select CD mode.
2. To open the CD door, press the CD open button.
3. Insert an MP3/CD or CD-R, with the printed side facing up and press the CD door gently
to close.
4. Press Play/Pause button on the unit to start playback. Press the pause button to pause at any
time. Press the play button once again to resume playback.
5. Press STOP, to end CD playback.
Note: CD/MP3 playback will also stop when:
-You open the CD compartment;
- You select the Radio source;
- The CD/MP3 has reached to the end.
EN-7