Page 1
Pool Cleaner User Manual For Warranty and Maintenance contact our sales&Service Team on 1300886609 or Email Service@roboticpoolcleaning.com.au www.roboticpoolcleaning.com,au...
Page 2
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. Catalogue Safty Warnings Product Overview Functions Product Specifications Parts List Packing List Start Up Procedure Proper Shut Down and Care Remote Control 4.5 Water Joint Maintenance Sponge Wheel 5.3 Drive Belt 5.4 Filter Bag 6 Troubleshooting and Warning Lights 7 Safty Checklist...
The Pool Cleaner is designed for use in swimming pools only. Any other use is prohibited and will void manufacturers' warranty. Do not swim in the pool whilst the Pool Cleaner is in use in order to avoid personal injury.
Remote Control. When the Remote Control is not being used, the Pool Cleaner will return to automatic mode. ◇ Overall Cleaning: the Pool Cleaner not only cleans the floor of your pool, it also cleans the wall, at the same time, the Pool Cleaner will filter water, and the dirt will be collected into Filter Bag.
Page 5
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. 2.3 Parts List ※ Main Body Parts Water Joint Guide Vane Drive Belt Base Plate Latch Filter Net Base Plate Water Retaining Board Support Frame Fillter Net Motor Box (Pic.2.3.2) - 3 -...
Page 6
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. ※ Power Box Parts Upper Cover Cable Socket Key Board Bottom Cover Power Socket Power Climb Direction Timer Light POWER 0.5h 1h climb (Pic.2.3.4) - 4 -...
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. 3 Packing List Serial Quantity Remarks Part Name Number Unit Body Power Box Remote Control Battery Host Guide Vane User Manual Warranty Card Certificate of Quality Floating Cable Spare parts Filter Bag 20μm (Pic.3.2.1) - 5 -...
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. 4 Product Operation 4.1 Power Connection ※ Please connect the Floating Cable to the Cable Socket of Power Box (see Pic. 4.1.1), then connect the Power Box to an outside AC power of 100v/240v 50/60Hz (see Pic.4.1.2). For the complete connection guide please refer Pic.4.1.3 Notices: Do not allow the Power Box to come in contact with water.
Cleaner in the pool: you must wobble the Pool Cleaner according Pic.4.2.1 to make sure the air inside is released when you put the Pool Cleaner in the water, so it will automatically sink to the bottom of pool. (Pic.4.2.1) (2)Start : press “...
Page 10
Latch on the Base Plate (Pic4.3.2) and remove the Filter Bag from Base Plate, clean the Filter Bag (Pic.4.3.3). Once clean the Filter Bag on its frame, reassemble the Base Plate and put it back into the Pool Cleaner once the Filter Bag is dry.
Page 11
Pool Cleaner, then store the Pool Cleaner in a dry, well-ventilated area. If you have the Caddy, please put the Pool Cleaner & Floating Cable on to the Caddy Cart, details please refer Pic.4.3.4...
Page 12
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. 4.5 Water Joint Step 1 ※ Insert Water Joint into Pool Cleaner. (Pic.4.5.1) Step 2 ※ Screw down the Lock Nut clockwise. (Pic.4.5.2) (Pic.4.5.2) Step 3 ※ Fix the Floating Cable as (Pic.4.5.3). (Pic.4.5.3) - 10 -...
※ Replace the Impeller if the old one gets worn or damage. Guide Vane Guide Vane Step 1 ※ Rotate Guide Vane clockwise to remove from the Pool Cleaner. (Pic.5.1.1) Step 2 ※ Use a Phillips Head Screw Driver to remove the bolt in the I m p e l l e r a c c o r d i n g t h e diagram.(Pic.5.1.2)
Page 14
5.2 Sponge Wheel ※ Replace the Sponge Wheels if they are badly worn or broken OPEN Step 1 ※ Invert the Pool Cleaner on the floor, remove the Base Plate(push Latch to unlock the Base Plate).(Pic.5.2.1) Step 2 ※ Remove the Filter Net from...
Page 15
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. Step 3 ※ Using a Phillips Head Screwdrive and 7mm ring spanner undo the six bolts and nuts on the Side Cover, to remove the Side Cover. (Pic.5.2.3) Transmission Components Side Cover (Pic.5.2.3) Step 4 Rolling Brush ※...
Page 16
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. Step 5 ※ Slide the old Sponge Wheels off, and replace with new Sponge Wheels (Pic.5.2.5) (Pic.5.2.5) Step 6 ※Assemble the Rolling Wheel Axle Brush to the Axle (Pic.5.2.6) .
Page 17
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. (Pic.5.2.8) (Pic.5.2.7) Step 8 Step 7 ※ Fasten the Transmission ※ Reassemble C o m p o n e n t s a n d S i d e the Transmission Covers to the body of the Components and unit using the nuts and Side Covers to the...
HANGZHOU GAOYUE TECHNOLOGY CO., LTD. 5.3 Drive Belt Replace the Drive Belt if they are broken(Pic 5.3.1) ※ Using a Phillips Head Screwdriver Drive Cover Spanner undo the bolds and nuts then remove the Drive Ccover and replace the Drive Belt. (Pic.5.3.1) Drive Belt Pic.5.3.1 Replace the Drive Belt 5.4 Filter Bag...
Page 19
Guide Vane. Note: The Power Box MUST BE DISCONNECTED from the Power Supply prior to conducting any maintenance on the Pool Cleaner. Contact your local distributor, or place of purchase for problems not covered in Trouble Shooting Guide. - 17 -...
Page 20
2.After waiting for temperature cooling to electring Blue light The roboter Blue light 1.Adjust the machine to the level state. Turn the Pool Cleaner over, and restart using The robot is flashing turned over flashing the Remote Control or Power Switch...
Page 21
◇Please inspect and clean the Impeller & Guide Vane according to chapter 5.1 after use. ◇If you are not going to use the Pool Cleaner for an extended period of time, make sure Pool Cleaner & Power Box is turned off, and store it in a dry, shady &...
Page 22
HANGZHOU GAOYUE TECHNOLOGY CO., LTD LIANGZHU UNIVERSITY SCIENCE PARK, HANGZHOU, CHINA T: 86-571-88759500 F: 86-571-88759501 E:SALE@ICHROBOTER.COM WWW.ICHROBOTER.COM...