Download Print this page

VESA AVLT-MT37-1 Quick Start Manual

Advertisement

Quick Links

SB350, SC300, SD300, SA100,SB150 Series
AVLT-MT37-1
AP4-0088A
UNPACKING INSTRUCTIONS
Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
Check package contents against the Supplied Parts List in the next page to assure that all components were
received undamaged. Do not use damaged or defective parts.
Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before beginning the installation, and carefully
follow all instructions contained herein. Use proper safety equipment during installation.
Please call a qualified installation contractor for help if you:
If you don't understand these directions or have any doubts about the safety of the installation.
If you are uncertain about the nature of your wall, consult a qualified installation contractor.
Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby
disclaim any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use
of this product.
Note:
The mounting components and hardware supplied in this package are not designed for installations to walls with steel studs
or to cinder block walls. If the hardware you need for your installation is not included, please consult your local hardware store for
proper mounting hardware for the application.
VESA Adapter Samsung
1
Samsung
932BW
P2770FH
PX2370
S20B350H
S20C300BL
S20D300H
S22A100N
S22B150N

Advertisement

loading

Summary of Contents for VESA AVLT-MT37-1

  • Page 1 VESA Adapter Samsung SB350, SC300, SD300, SA100,SB150 Series Samsung 932BW P2770FH PX2370 S20B350H S20C300BL S20D300H S22A100N S22B150N AVLT-MT37-1 AP4-0088A UNPACKING INSTRUCTIONS Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage. Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged.
  • Page 2 Monitor to VESA Plate Position the base clip on the Adaptor Bracket Connect the VESA plate to the Adaptor Bracket (a) and insert the screw from step one into the (a) using 4pc M4X12 Thumb Bolts (b). center hole in the bottom of bracket.

This manual is also suitable for:

Ap4-0088a