1. Introduction
This specification is described in details based on BLE remote control (RC) which is built on Telink's
TLSR827x platform and has button function and voice command function support.
1.1 Supported features
The RC demo supports the following features:
works with dual batteries
27 valid buttons and 2-color indicating LEDs
Google voice service
Voice compressed with ADPCM, supported sample rate 16Khz/16bit
Repeated buttons
Couch mode
OTA firmware upgrade
PC tool for button display and demonstration
1.2 Electrical specification
Current consumption for the RC demo is shown as below:
1)
BLE mode
-
Voice commands: 11.5mA
-
Button press: <1 mA
-
Button long press (<60s): 0.4mA
-
Couch mode (long press time > 60s): ~11uA
-
Idle in connection state: 18uA
-
Deep sleep: 0.4uA
-
Advertising: 1.5mA
-
Low power current (Battery power below 1.9V): <18uA
PS-20033000-E1
Spec For TLSR827x-based BLE Audio Remote Control
7
Ver.0.1.0