Table of Contents
Advertisement
To transmit and upgrade the test firmware 2 (starting from 0x40000) to the RC via OTA, click the "SW2"
5.
button of the dongle. The dongle's green LED will first be turned on, then blink three times. The white
LED will be turned on to indicate OTA is finished.
Note
During OTA process, audio function is disabled, and button function is normal.
During OTA process, RCU does not allow Pairing/Un-pairing/FW version check.
To ensure recording quality, it's not recommended to make the RCU enter OTA during recording
process.
PS-20033000-E1
Spec For TLSR827x-based BLE Audio Remote Control
31
Ver.0.1.0
Advertisement
Table of Contents
